DC048B010T010FP Datasheet, PDF (2/21 Pages) Vicor Corporation – 48 V Input DC-DC Converter Modules

MODULE FAMILY ELECTRICAL CHARACTERISTICS
Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature,
unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.
Absolute Maximum Ratings
Parameter
+In to –In voltage
PC to –In voltage
+Out to -Out
1.0 V
1.5 V
1.8 V
2.5 V
3.0 V
3.3 V
5V
10 V
12 V
15 V
24 V
28 V
48 V
Isolation voltage
In to out
In to base
Out to base
Operating Temperature
Storage Temperature
Pin soldering temperature
Mounting torque
Rating
-1.0 to +85
-0.3 to +6.0
-0.5 to 4.0
-0.5 to 4.0
-0.5 to 4.0
-0.5 to 6.0
-0.5 to 6.0
-0.5 to 12.0
-0.5 to 12.0
-0.5 to 30.0
-0.5 to 30.0
-0.5 to 25
-0.5 to 50.0
-0.5 to 48.0
-0.5 to 60.0
2,250
2,250
707
-55 to +100
-65 to +125
500 (260)
750 (390)
5 (0.57)
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
°C
°C
°F (°C)
°F (°C)
in-lbs (N-m)
Notes
Test voltage
Test voltage
Test voltage
M-Grade
M-Grade
<5 sec; wave solder
<7 sec; hand solder
6 each
Note: Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions
in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability.
Input Specifications
Parameter
Operating input voltage
Input surge withstand
Undervoltage turn-on
Undervoltage turn-off
Overvoltage turn-on
Overvoltage turn-off
Recommended external
input capacitance
Min
Typ
Max
Unit
36
48
75
Vdc
85
Vdc
33.8
35.3
Vdc
30.4
31.8
Vdc
75.7
77.3
Vdc
78.8
81.0
Vdc
100
µF
Notes
See Figure 19
VI Brick / 48V Input DC-DC Converter Modules
vicorpower.com
Rev. 1.1
Page 2 of 21