V110B24C200BL Datasheet, PDF (11/13 Pages) Vicor Corporation – 110V Input Mini Family DC-DC Converter Module

CONTROL FUNCTIONS - PR PIN (CONT.)
+In _+Out
PC
Module
1
PR
+S
+S
SC
–S
–S
–In –Out
+In _+Out
PC
Module
2
PR
+S
+S
SC
–S
–S
–In _–Out
+In
Module PC
N+1
PR
–In
+Out
+S
SC
–S
–Out
+S
Load
–S
• The +Out and –Out power buses
should be designed to minimize
and balance parasitic impedance
from each module output to the
load.
• The +Sense pins should be tied
to the same point on the +Out
power bus; the –Sense pins
should be tied to the same point
on the –Out power bus.
• At the discretion of the power
system designer, a subset of all
modules within an array may be
configured as slaves by shorting
SC to –S.
• ORʼing diodes may be inserted in
series with the +Out pins of each
module to provide module output
fault tolerance.
Figure 11 — N+1 module array output connections.
+In
+Out
PC
+S
SC
PR
–S
–In
–Out
+Sense from
other modules
in the array
Figure 12 — OR’ing diodes connections.
PIN STYLES*
Designator
(None)
L
S
N
F
G
Description
Short Tin/Lead
Long Tin/Lead
Short ModuMate
Long ModuMate
Short RoHS
Long RoHS
Notes
Requires in-board, mounting
On-board mounting for 0.065" boards
SurfMate or in-board socket mounting
On-board socket mounting
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
Select for RoHS compliant on-board solder or socket mounting
* Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V110B12T200BN2 — Long ModuMate Pins
Vicor Corp. Tel: [phone] Fax: [phone]
110V Mini Family
Set your site on VICOR at vicorpower.com
Rev. 2.3
Page 11 of 13