VTM48RP015X050AB1 Datasheet, PDF (1/3 Pages) Vicor Corporation – Sine Amplitude Converter

Features
• 38.4 Vdc to 1.2 Vdc 50 A current multiplier
n Operating from standard 48 V or 24 V
PRM^™ regulators
n Up to 52 Volts DC input
n K of 1/32 provides up to 50 A DC output current
• High efficiency (>93%) reduces system
power consumption
• High density (962 A/in³)
• Vicor’s 0623 ChiP package enables
low impedance interconnect to system board
• Provides enable / disable control,
internal temperature monitoring,
internal current monitoring
• ZVS / ZCS resonant Sine Amplitude
Converter topology
• Parallel up to 10 modules
Typical Applications
• Computing and Telecom Systems
n Optimized for Memory and High Power ASICs
• Automated Test Equipment
• High Density Power Supplies
• Communications Systems
VTM^™ Current Multiplier
VTM48RP015x050AB1
®
S
C
US
C NRTL US
Sine Amplitude Converter™ (SAC™)
Product Ratings
V_IN = 0 to 52 V
V_OUT = 0 to 1.63 V (no load)
I_OUT = 50 A (nom)
K = 1/32
Product Description
The Vicor’s 0623 ChiP VTM current multiplier is a high
efficiency (>93%) Sine Amplitude Converter™ (SAC™)
operating from a 0 to 52 Vdc primary bus to deliver a 0 to
1.63 Vdc low voltage output. The Sine Amplitude Converter
offers a low AC impedance beyond the bandwidth of most
downstream regulators; therefore capacitance normally at the
load can be located at the input to the Sine Amplitude
Converter. Since the K factor of the VTM48RP015x050AB1 is
1/32, the capacitance value can be reduced by a factor of 1024,
resulting in savings of board area, materials and total system
cost.
The VTM48RP015x050AB1 is provided in Vicor’s 0623 ChiP
package compatible with standard pick-and-place assembly
processes. The co-molded ChiP package provides enhanced
thermal management due to a large thermal interface area and
superior thermal conductivity. The high conversion efficiency
of the VTM48RP015x050AB1 increases overall system efficiency
and lowers operating costs compared to conventional
approaches.
The VTM48RP015x050AB1 enables the utilization of Factorized
Power Architecture™ which provides efficiency and size
benefits by lowering conversion and distribution losses and
promoting high density point of load conversion.
VTM^™ Current Multiplier
Page 1 of 3
Rev 1.1
10/2014
vicorpower.com
800 927.9474