VTM48EX080Y030A00 Datasheet, PDF (1/18 Pages) Vicor Corporation – High Efficiency, Sine Amplitude Converter

VTM Current Multiplier
VTM48E x080 y 030A00
S
C NRTL US
High Efficiency, Sine Amplitude Converter™
FEATURES
• 48 Vdc to 8 Vdc 30 A current multiplier
- Operating from standard 48 V or 24 V PRM^® Regulators
• High efficiency (>95%) reduces system power
consumption
• High density (102 A/in³)
• “Full Chip” VI Chip^® package enables surface mount,
low impedance interconnect to system board
• Contains built-in protection features against:
- Overvoltage Lockout
- Overcurrent
- Short Circuit
- Overtemperature
• Provides enable / disable control,
internal temperature monitoring
• ZVS / ZCS resonant Sine Amplitude Converter topology
• Less than 50ºC temperature rise at full load
in typical applications
TYPICAL APPLICATIONS
• High End Computing Systems
• Automated Test Equipment
• High Density Power Supplies
• Communications Systems
TYPICAL APPLICATION
Regulator
VC
PR
SG
OS
PC
CD
TM
IL
PRM^®
Regulator
+In
+Out
VIN
-In
-Out
Factorized Power Architecture^TM
DESCRIPTION
The VI Chip^® current multiplier is a high efficiency (>95%)
Sine Amplitude Converter™ (SAC) operating from a
26 to 55 Vdc primary bus to deliver an isolated output. The
Sine Amplitude Converter offers a low AC impedance beyond
the bandwidth of most downstream regulators; therefore
capacitance normally at the load can be located at the input to
the Sine Amplitude Converter. Since the K factor of the
VTM48EF080T030A00 is 1/6, the capacitance value can be
reduced by a factor of 36, resulting in savings of board area,
materials and total system cost.
The VTM48EF080T030A00 is provided in a VI Chip package
compatible with standard pick-and-place and surface mount
assembly processes. The co-molded VI Chip package provides
enhanced thermal management due to a large thermal
interface area and superior thermal conductivity. The high
conversion efficiency of the VTM48EF080T030A00 increases
overall system efficiency and lowers operating costs compared
to conventional approaches.
The VTM48EF080T030A00 enables the utilization of Factorized
Power Architecture™ which provides efficiency and size
benefits by lowering conversion and distribution losses and
promoting high density point of load conversion.
V_IN = 26 to 55 V
V_OUT = 4.3 to 9.2 V(NO LOAD)
I_OUT = 30 A (NOM)
K = 1/6
PART NUMBERING
PART NUMBER
PACKAGE STYLE PRODUCT GRADE
VTM48E x 080 y 030A00 ^{F = J-Lead}
T = -40 to 125°C
T = Through hole M = -55 to 125°C
For Storage and Operating Temperatures see Section 6.0 General Characteristics
Voltage Transformer
TM
VC
PC
L
VTM^®
O
Transformer
+In
+Out
A
D
-In
-Out
(See Application Note AN:024)
VTM^® Current Multiplier
Page 1 of 18
Rev 1.3
07/2015
vicorpower.com
800 927.9474