VTM48EX060Y040A00 Datasheet, PDF (1/20 Pages) Vicor Corporation – High Efficiency, Sine Amplitude Converter™

VTM™ Current Multiplier
VTM48Ex060y040A00
S
C NRTL US
High Efficiency, Sine Amplitude Converter™
Features & Benefits
• 48V_DC to 6V_DC 40A current multiplier
n Operating from standard 48V or 24V PRM™ Regulators
• High efficiency (>96%) reduces system power
consumption
• High density (136A/in³)
• “Full Chip” VI Chip^® package enables surface mount,
low impedance interconnect to system board
• Contains built-in protection features against:
n Overvoltage Lockout
n Overcurrent
n Short Circuit
n Overtemperature
• Provides enable/disable control,
internal temperature monitoring
• ZVS/ZCS resonant Sine Amplitude Converter topology
• Less than 50ºC temperature rise at full load
in typical applications
Typical Applications
• High End Computing Systems
• Automated Test Equipment
• High Density Power Supplies
• Communications Systems
Typical Application
Description
The VI Chip^® current multiplier is a high efficiency (>96%)
Sine Amplitude Converter™ (SAC) operating from a
26 to 55V_DC primary bus to deliver an isolated output. The
Sine Amplitude Converter offers a low AC impedance beyond
the bandwidth of most downstream regulators; therefore
capacitance normally at the load can be located at the input
to the Sine Amplitude Converter. Since the K factor of the
VTM48EF060T040A00 is 1/8, the capacitance value can be
reduced by a factor of 64, resulting in savings of board area,
materials and total system cost.
The VTM48EF060T040A00 is provided in a VI Chip package
compatible with standard pick-and-place and surface mount
assembly processes. The co-molded VI Chip package provides
enhanced thermal management due to a large thermal interface
area and superior thermal conductivity. The high conversion
efficiency of the VTM48EF060T040A00 increases overall system
efficiency and lowers operating costs compared to
conventional approaches.
The VTM48EF060T040A00 enables the utilization of Factorized
Power Architecture™ which provides efficiency and size benefits
by lowering conversion and distribution losses and promoting high
density point of load conversion.
Product Ratings
V_in = 26 – 55V
I_out = 40A _(NOM)
V_out = 3.3 – 6.9V (no load)
K = 1/8
Part Numbering
Product Number
Package Style
Product Grade
VTM48Ex060y040A00
F = J-Lead
T = Through hole
T = -40° to 125°C
M = -55° to 125°C
For Storage and Operating Temperatures see General Characteristics Section
Regulator
Voltage Transformer
VC
PR
SG
OS
PC
CD
TM
IL
PRM^™
Regulator
+IN
+OUT
V_IN
TM
VC
PC
VTM^™
Transformer
+IN
+OUT
L
O ^{(See Application Note AN:024)}
A
D
-IN
-OUT
Factorized Power Architecture^TM
-IN
-OUT
VTM^™ Current Multiplier
Page 1 of 20
Rev 1.3
11/2016
vicorpower.com
800 927.9474