VTM48EF012T130A01 Datasheet, PDF (1/17 Pages) Vicor Corporation – VTM Current Multiplier

VTM48EF012T130A01
VTM™
Current Multiplier
®
C
US
S
C NRTL US
FEATURES
• Optimized for VR12.0
• 40 Vdc to 1 Vdc 130 A current multiplier
- Operating from standard 48 V or 24 V PRM™ regulators
• High efficiency (>94%) reduces system power
consumption
• High density (443 A/in³)
• “Full Chip” VI Chip^® package enables surface mount,
low impedance interconnect to system board
• Contains built-in protection features against:
- Overvoltage
- Overtemperature
• Provides enable / disable control,
internal temperature monitoring
• ZVS / ZCS resonant Sine Amplitude Converter topology
• Less than 50ºC temperature rise at full load
in typical applications
TYPICAL APPLICATIONS
• High End Computing Systems
• Automated Test Equipment
• High Density Power Supplies
• Communications Systems
TYPICAL APPLICATION
Voltage
Control
DESCRIPTION
The VI Chip^® current multiplier is a high efficiency (>94%) Sine
Amplitude Converter™ (SAC™) operating from a 26 to 55 Vdc
primary bus to deliver an isolated output. The Sine Amplitude
Converter offers a low AC impedance beyond the bandwidth
of most downstream regulators; therefore capacitance normally
at the load can be located at the input to the Sine Amplitude
Converter. Since the K factor of the VTM48EF012T130A01 is
1/40, the capacitance value can be reduced by a factor of 1600,
resulting in savings of board area, materials and total system cost.
The VTM48EF012T130A01 is provided in a VI Chip^® package
compatible with standard pick-and-place and surface mount
assembly processes. The co-molded VI Chip^® package provides
enhanced thermal management due to a large thermal
interface area and superior thermal conductivity. The high
conversion efficiency of the VTM48EF012T130A01 increases
overall system efficiency and lowers operating costs compared
to conventional approaches.
The VTM48EF012T130A01 enables the utilization of Factorized
Power Architecture™ which provides efficiency and size
benefits by lowering conversion and distribution losses and
promoting high density point of load conversion.
V_IN = 26 to 55 V
V_OUT = 0.7 to 1.4 V(NO LOAD)
I_OUT = 130 A (NOM)
K = 1/40
PART NUMBER
VTM48EF012T130A01
DESCRIPTION
-40°C to 125°C TJ
Feedback
Enable/
Disable
38 to 55
Vdc Input
PC
+IN
PR TM
+OUT
PRM^TM
Regulator
-IN
IF RE
-OUT
SG VC
Constant
Vc
Voltage
Reference
Current
Sense
PC
+IN
+OUT1
+OUT2
VTM48EF012T130A01
-IN
-OUT1
VC -OUT2
PC
+IN
+OUT1
+OUT2
VTM48EF012T130A01
-IN
-OUT1
VC -OUT2
Load
v i c o r p o w e r. c o m
VI CHIP CORP. (A VICOR COMPANY) 25 FRONTAGE RD. ANDOVER, MA 01810 800-735-6200
Rev. 1.2
7/2012
Page 1 of 17