VT048A015T100FP Datasheet, PDF (1/11 Pages) Vicor Corporation – VTM™ Current Multiplier

VTM^TM Current Multiplier
Size:
1.91 x 1.09 x 0.37 in
48,6 x 27,7 x 9,5 mm
Applications
• Solid state lighting
• Stadium displays
• Industrial controls
• Avionics
• Underseas
• RF Amplifiers
• Microprocessor and DSP
requiring fast response
Features
• 100°C baseplate operation
• 48 V to 1.5 V Converter
• 100.0 A (150.0 A for 1 ms)
• High density – up to 130 A/in³
• Small footprint – 1.64 and 2.08 in²
• Height above board – 0.37 in (9.5 mm)
• Low weight – 1.10 oz (31.3 g)
• ZVS / ZCS isolated sine amplitude converter
• Typical efficiency 89%
• <1 µs transient response
• Isolated output
• No output filtering required
• Lead free wave solder compatible
• Agency approvals
Product Overview
The thermally enhanced VI BRICK VTM current multiplier excels at speed, density and
efficiency to meet the demands of advanced power applications. Combined with the
VI BRICK PRM regulator they create a DC-DC converter with flexibility to provide isolation
and regulation where needed. The PRM can be located with the VTM at the point of load
or remotely in the back plane or on a daughter card.
Part Numbering
VT
048
A
015 T
100
F
P
Voltage
Transformation
Module
Input
Voltage
Designator
Package
Size
Output
Voltage
Designator
(=V_OUT x10)
Output
Current
Designator
(=I_OUT)
Product Grade Temperatures (°C)
Grade Operating Storage
T = -40 to +100 -40 to +125
M = -55 to +100 -65 to +125
Baseplate
F = Slotted flange
T = Transverse heat sink^[a]
[a] _{Contact factory}
Pin Style
P = Through hole
Voltage Transformation Module VT048A015T100FP
vicorpower.com
Rev. 1.1
Page 1 of 11