VIV0005TFJ Datasheet, PDF (1/18 Pages) Vicor Corporation – DC to DC Voltage Transformer

VTM^TM
DC to DC
Voltage Transformer
VIV0005TFJ
®
C
US
S
C NRTL US
FEATURES
• 40 Vdc to 1 Vdc 130 A Voltage Transformer
- Operating from standard 48 V or 24 V PRM^TM regulators
• 150 A rated with reduced case temperature at 30°C
• High efficiency (>91%) reduces system power
consumption
• High density (117 A/in²)
• “Full Chip” V•I Chip package enables surface mount,
low impedance interconnect to system board
• Contains built-in protection features:
- Overvoltage Lockout
- Overcurrent
- Short Circuit
- Over Temperature
• Provides enable / disable control, internal temperature
monitoring, current monitoring
• ZVS / ZCS resonant Sine Amplitude Converter topology
• Less than 50ºC temperature rise at full load
in typical applications
DESCRIPTION
The V•I Chip Voltage Transformer is a high efficiency (>91%)
Sine Amplitude Converter (SAC)^TM operating from a 26 to 55 Vdc
primary bus to deliver an isolated output. The Sine Amplitude
Converter offers a low AC impedance beyond the bandwidth of
most downstream regulators, which means that capacitance
normally at the load can be located at the input to the Sine
Amplitude Converter. Since the K factor of the VIV0005TFJ is
1/40, that capacitance value can be reduced by a factor of
1600, resulting in savings of board area, materials and total
system cost.
The VIV0005TFJ is provided in a V•I Chip package compatible
with standard pick-and-place and surface mount assembly
processes. The co-molded V•I Chip package provides enhanced
thermal management due to large thermal interface area and
superior thermal conductivity. With high conversion efficiency
the VIV0005TFJ increases overall system efficiency and lowers
operating costs compared to conventional approaches.
The VIV0005TFJ enables the utilization of Factorized Power
Architecture^TM providing efficiency and size benefits by lowering
conversion and distribution losses and promoting high density
point of load conversion.
TYPICAL APPLICATION
• High End Computing Systems
• Automated Test Equipment
• High Density Power Supplies
V_IN = 26 to 55 V
V_OUT = 0.65 to 1.37 V(NO LOAD)
I_OUT = 130 A (NOM)
K = 1/40
PART NUMBER
VIV0005TFJ
DESCRIPTION
-40°C to 125°C TJ
Regulator
VC
PR
SG
OS
PC
CD
TM
IL
PRM
V_IN
+In
+Out
-In
-Out
Factorized Power Architecture
(See Application Note AN:024)
Voltage Transformer
PC
IM
VC
TM
L
VTM
O
+In
+Out
A
D
-In
-Out
v i c o r p o w e r. c o m
V•I CHIP INC. (A VICOR COMPANY) 25 FRONTAGE RD. ANDOVER, MA 01810 800-735-6200
Rev. 1.1
7/2009
Page 1 of 18