English
Language : 

VIB0101THJ Datasheet, PDF (1/16 Pages) Vicor Corporation – DC to DC Bus Converter Module
VIB0101THJ
S
C NRTL US
BCMTM
DC to DC
Bus Converter Module
FEATURES
• 48 Vdc – 12 Vdc 120 W Bus Converter Module
• High efficiency (>95%) reduces system power
consumption
• High power density (801 W/in3) reduces power system
footprint by >50%
• “Half Chip” V•I Chip package enables surface mount,
low impedance interconnect to system board
• Contains built-in protection features: undervoltage,
overvoltage lockout, over current protection, short
circuit protection, overtemperature protection.
• Provides enable/disable control, internal temperature
monitoring
• ZVS/ZCS Resonant Sine Amplitude Converter topology
• Less than 50°C temperature rise at full load in typical
applications
TYPICAL APPLICATION
• High End Computing Systems
• Automated Test Equipment
• Telecom Base Stations
• High Density Power Supplies
• Communication Systems
TYPICAL APPLICATION
DESCRIPTION
The V•I Chip Bus Converter Module is a high efficiency (>95%)
Sine Amplitude Converter (SAC) operating from a 38 to 55 Vdc
primary bus to deliver an isolated 12 V nominal, unregulated
secondary. The SAC offers a low AC impedance beyond the
bandwidth of most downstream regulators, meaning that input
capacitance normally located at the input of a 12 V regulator
can be located at the input to the SAC. Since the K factor of
the VIB0101THJ is 1/4, that capacitance value can be reduced
by a factor of 16x, resulting in savings of board area, materials
and total system cost.
The VIB0101THJ is provided in a V•I Chip package compatible
with standard pick-and-place and surface mount assembly
processes. The V•I Chip package provides flexible thermal
management through its low junction-to-case and junction-to-
board thermal resistance. With high conversion efficiency the
VIB0101THJ increases overall system efficiency and lowers
operating costs compared to conventional approaches.
VIN = 38 – 55 V
VOUT = 9.5 – 13.75 V (NO LOAD)
POUT = 120 W(NOM)
K = 1/4
enable / disable
POL
switch
TM
PC
SW1
POL
F1
+In BCM+Out
POL
VIN
3.15 A
C1 10 µF
VOUT
POL
-In
-Out
v i c o r p o w e r. c o m
V•I CHIP INC. (A VICOR COMPANY) 25 FRONTAGE RD. ANDOVER, MA 01810 800-735-6200
Rev. 1.4
9/2009
Page 1 of 16