VI-231-EU-BM Datasheet, PDF (1/3 Pages) Vicor Corporation – Battery Charger Current Source Modules

Features
• RoHS compliant (VE versions)
• Programmable output current
• Booster versions available
• Size: 4.6" x 2.4" x 0.5"
(116,8 x 61,0 x 12,7 mm)
• UL, CSA, TÜV
• Compatible with all major battery types
• Inputs: 48, 150, 300 Vdc
• Outputs: 12, 24, 48 Vdc Nominal
• Analog current monitor
• Analog overvoltage adjust
• CE Marked
Data Sheet
BatMod ^TM
Battery Charger Current Source Modules
Product Highlights
The BatMod combines Vicor’s industry standard
package with the flexibility of a power converter
whose output voltage and output current may be
independently set. BatMod’s allow the user to
independently program a constant output current
and a maximum float voltage. The float voltage is
the point at which the BatMod transitions from
constant current to constant voltage. These
features make the BatMod an ideal candidate for
battery charging and other applications which
require a controlled current source.
The BatMod is also available in booster
versions that enable the designer to create systems
capable of multiple kilowatts of
output power.
With its wide range of input options, the BatMod
is compatible with all major
battery types. This new current output
module finds application in systems where easily
programmable current is of primary importance.
Consult factory for availability of input/output volt-
age ranges not shown.
Specifications
(typical TBP = 25°C, nominal line, 75% load, unless otherwise specified)
Parameter
Nominal input voltage
Output current
(Refer to safe operating curves on page 2)
Current control input
Current monitor output
Voltage control input
Output voltage setpoint
Trimmable +10%, -25%
Dynamic characteristics
Dielectric withstand
Input to output
Output to baseplate
Input to baseplate
Rating
48 Vdc, 150 Vdc,
300 Vdc
0 – 14.5 A
0 – 7.25 A
0 – 3.6 A
1–5V
1–5V
0 – 2.5 V
15 V, 30 V, 60 V +/-1%
V-Mode: 300 µsec typ.
I-Mode: 250 µsec typ.
3,000 VRMS
500 VRMS
1,500 VRMS
Notes
42 – 60 V, 100 – 200 V,
200 – 400 V
12 V battery system
24 V battery system
48 V battery system
Zero to max. current
Zero to full load
Zero to FS output
12 V, 24 V, 48 V
Output Respectively
VNOM for 50 – 100%
load changes
Packaging Options
SlimMods™, high power density, flangeless
packages and FinMods™, featuring integral
finned heatsinks.
SlimMod: Option suffix: - S
Example:
VX - XXX - XU - BM - S
FinMod: Option suffix: - F1, - F2, - F3 and - F4
Examples:
VX - XXX - XU -BM -F1, 0.25"H longitudinal fin
VX - XXX - XU -BM -F2, 0.5"H longitudinal fin
VX - XXX - XU -BM -F3, 0.25"H transverse fin
VX - XXX - XU -BM -F4, 0.5"H transverse fin
Part Numbering
(typical model: input 300 Vdc, output 12 Vdc at 200 W)
V I^* - 2 6 1 - E U
* E = RoHS
Module
2 = Driver
B= Booster
Input Voltage
Nominal Range
3 = 48 V 42 – 60 V
5 = 150 V 100 – 200 V
6 = 300 V 200 – 400 V
Output Voltage
Nominal
Range
1 = 12 V 11.25 – 16.5 V
3 = 24 V ¹ 22.5 – 33.0 V
4 = 48 V 45.0 – 66.0 V
1_{Available in 300 V input only}
- BM
Product Grade Temperatures (°C)
Grade Operating
Storage
E = - 10 to + 85 - 20 to + 100
C = - 25 to + 85 - 40 to + 100
I = - 40 to + 85 - 55 to + 100
M = - 55 to + 85 - 65 to + 100
Vicor Corp. Tel: [phone] Fax: [phone] BatMod Battery Charger Current Source Modules
Set your site on VICOR at www.vicorpower.com
Rev. 1.5
Page 1 of 3