V375A28C600A Datasheet, PDF (1/8 Pages) Vicor Corporation – DC-DC Converter Module

45
Features
• DC input range: 250 - 425V
• Input surge withstand: 500V for 100ms
• DC output: 28V
• Programmable output: 10 to 110%
• Regulation: ±0.2% no load to full load
• Efficiency: 89%
• Maximum operating temperature:
100°C at full load
• Power density: 119W/cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture
375Vin / 28Vout / 600Watts
DC-DC Converter Module
Model Number V375A28C600A*
Typical Applications: distributed power;
off-line systems using power PFC front-ends;
electric vehicles
Shown actual size:
4.6 x 2.2 x 0.5 in
117 x 56 x 12,7 mm
Product Overview
Absolute Maximum Ratings
This DC-DC converter module uses
2nd Generation power processing, control
and packaging technologies to provide the
performance, flexibility and cost effectiveness
expected of a mature power component.
Parameter
+In to –In voltage
+In to –In voltage
Rating
-0.5 to +425.0
500
For example, a plated-cavity core transformer PC to –In voltage
-0.5 to +7.0
couples widely separated primary and
PR to –In voltage
-0.5 to +7.0
secondary windings, resulting in low in-to-
out parasitic capacitance and noise.
High frequency ZCS/ZVS switching,
advanced power semiconductor packaging
+Out to –Out voltage
+Sense to –Out voltage
–Sense to –Out voltage
-0.5 to +36.9
-0.5 to +36.9
1.0
and thermal management provide high
SC to –Out voltage
-0.5 to +1.5
power density with low temperature
Isolation voltage (in to out)
3000
gradients. Extensive use of silicon
integration results in 1/3 the part count
Isolation voltage (in to base)
1550
of a 1st Generation converter.
Isolation voltage (out to base)
500
* _{Part Numbering}
Storage temperature (C–Grade) -40 to +125
Operating temperature (C–Grade) -20 to +100
V 375 A 5 C 400 A
Input Voltage
24 = 24Vin
48 = 48Vin
300 = 300Vin
375 = 375Vin
A = Maxi
B = Mini
C = Micro
Output
Voltage
Output
Power
Pin
Style
Product Grade Temperatures (°C)
Grade Storage Operating
C = - 40 to +125 - 20 to +100
T = - 40 to +125 - 40 to +100
H = - 55 to +125 - 40 to +100
M = - 65 to +125 - 55 to +100
Base-
plate
Pin soldering temperature
Pin soldering temperature
Mounting torque
500 (260)
750 (390)
5 (0.57)
Thermal Resistance and Capacity
Parameter
Min
For pin styles see page 6. Slotted baseplate
(style 1) requires no designator. For
threaded baseplate add a “2” to the end of
the part number. For thru-hole, add a “3”.
See page 7 for dimensions.
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20263)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Thermal capacity
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vrms
Vrms
Vrms
°C
°C
°F (°C)
°F (°C)
in-lbs (N-m)
Notes
<100ms
See part numbering chart on this
page for other product grades.
Baseplate
<5 sec; wave solder
<7 sec; hand solder
6 each, # 4-40 or M3
Typ
Max
Unit
0.08
°C/Watt
0.07
°C/Watt
4.9
°C/Watt
1.1
°C/Watt
165
Watt-sec/°C
Vicor Corp. Tel: [phone] Fax: [phone]
V375A28C600A DC-DC Converter
Set your site on VICOR at www.vicorpower.com
Rev. 5.2
Page 1 of 8