V24C28C100A Datasheet, PDF (1/8 Pages) Vicor Corporation – 24Vin / 28Vout / 100Watts DC-DC Converter Module

45
Features
• DC input range: 18 - 36V
• Input surge withstand: 50V for 100ms
• DC output: 28V
• Programmable output: 10 to 110%
• Regulation: ±0.2% no load to full load
• Efficiency: 87%
• Maximum operating temperature:
100°C at full load
• Power density: 60W/cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture
Typical Applications: telecommunications,
process control and distributed power
systems
24Vin / 28Vout / 100Watts
DC-DC Converter Module
Model Number V24C28C100A*
Shown actual size:
2.28 x 1.45 x 0.5 in
57,9 x 36,8 x 12,7 mm
Product Overview
This DC-DC converter module uses
second generation power processing, control
and packaging technologies to provide the
performance, flexibility and cost effectiveness
expected of a mature Power Component.
For example, a plated-cavity core transformer
couples widely separated primary and
secondary windings, resulting in low in-to-
out parasitic capacitance and noise.
High frequency ZCS/ZVS switching,
advanced power semiconductor packaging
and thermal management provide high
power density with low temperature
gradients. Extensive use of silicon
integration results in 1/3 the part count
of a first generation converter.
* _{Part Numbering}
V 24 C 5 C 100 A
Absolute Maximum Ratings
Parameter
+In to –In voltage
+In to –In voltage
PC to –In voltage
PR to –In voltage
+Out to –Out voltage
SC to –Out voltage
Isolation voltage (in to out)
Isolation voltage (in to base)
Isolation voltage (out to base)
Storage temperature (C-Grade)
Operating temperature (C-Grade)
Pin soldering temperature
Pin soldering temperature
Mounting torque
Rating
-0.5 to +36
50
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +41.0
-0.5 to +1.5
3000
1550
500
-40 to +125
-20 to +100
500 (260)
750 (390)
5 (.57)
Input
Voltage
Output
Voltage
Output
Power
A = Maxi
B = Mini
C = Micro
Product Grade Temperatures (°C)
Grade
Storage
Operating
C = - 40 to +125 - 20 to +100
T = - 40 to +125 - 40 to +100
H = - 55 to +125 - 40 to +100
M = - 65 to +125 - 55 to +100
For long pin configuration add “L” to the
end of the part number. Slotted baseplate
(style 1) requires no designator. For
threaded baseplate add a “2” to the end of
the part number. For thru-hole, add a “3”.
See page 7 for dimensions.
Thermal Resistance and Capacity
Parameter
Min
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20265)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Thermal capacity
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vrms
Vrms
Vrms
°C
°C
°F (°C)
°F (°C)
in-lbs (N-m)
Notes
<100ms
See part numbering chart on this
page for other product grades.
Baseplate
<5 sec; wave solder
<7 sec; hand solder
6 each, # 4-40 or M3
Typ
Max
Unit
0.24
°C/Watt
0.21
°C/Watt
10.9
°C/Watt
2.8
°C/Watt
48
Watt-sec/°C
Vicor Corporation Tel: [phone] Fax: [phone] Data Sheet: V24C28C100A DC-DC Converter Date: 11-00 Rev. 2
Set your site on VICOR at www.vicr.com
Page 1 of 8