V24C24C100A Datasheet, PDF (1/8 Pages) Vicor Corporation – 24Vin / 24Vout / 100Watts DC-DC Converter Module

45
Features
• DC input range: 18 - 36V
• Input surge withstand: 50V for 100ms
• DC output: 24V
• Programmable output: 10 to 110%
• Regulation: ±0.2% no load to full load
• Efficiency: 87%
• Maximum operating temperature:
100°C at full load
• Power density: 60W/cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture
Typical Applications:telecommunications,
process control and distributed
power systems
24Vin / 24Vout / 100Watts
DC-DC Converter Module
Model Number V24C24C100A*
Shown actual size:
2.28 x 1.45 x 0.5 in
57,9 x 36,8 x 12,7 mm
Product Overview
This DC-DC converter module uses
2nd Generation power processing, control
and packaging technologies to provide the
performance, flexibility and cost effectiveness
expected of a mature power component.
For example, a plated-cavity core transformer
couples widely separated primary and
secondary windings, resulting in low in-to-
out parasitic capacitance and noise.
High frequency ZCS/ZVS switching,
advanced power semiconductor packaging
and thermal management provide high
power density with low temperature
gradients. Extensive use of silicon
integration results in 1/3 the part count
of a 1st Generation converter.
* _{Part Numbering}
V 24 C 15 C 100 A
Input Voltage
24 = 24Vin
48 = 48Vin
300 = 300Vin
375 = 375Vin
A = Maxi
B = Mini
C = Micro
Output
Voltage
Output
Power
Pin
Style
Product Grade Temperatures (°C)
Grade Storage Operating
C = - 40 to +125 - 20 to +100
T = - 40 to +125 - 40 to +100
H = - 55 to +125 - 40 to +100
M = - 65 to +125 - 55 to +100
Base-
plate
For pin styles see page 6. Slotted baseplate
(style 1) requires no designator. For
threaded baseplate add a “2” to the end of
the part number. For thru-hole, add a “3”.
See page 7 for dimensions.
Absolute Maximum Ratings
Parameter
Rating
+In to –In voltage
-0.5 to +36.0
+In to –In voltage
50
PC to –In voltage
-0.5 to +7.0
PR to –In voltage
-0.5 to +7.0
+Out to –Out voltage
-0.5 to +31.7
SC to –Out voltage
-0.5 to +1.5
Isolation voltage (in to out)
3000
Isolation voltage (in to base)
1550
Isolation voltage (out to base)
500
Storage temperature (C–Grade) -40 to +125
Operating temperature (C–Grade) -20 to +100
Pin soldering temperature
500 (260)
Pin soldering temperature
750 (390)
Mounting torque
5 (0.57)
Thermal Resistance and Capacity
Parameter
Min
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20265)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Thermal capacity
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vrms
Vrms
Vrms
°C
°C
°F (°C)
°F (°C)
in-lbs (N-m)
Notes
<100ms
See part numbering chart on this
page for other product grades.
Baseplate
<5 sec; wave solder
<7 sec; hand solder
6 each, # 4-40 or M3
Typ
Max
Unit
0.24
°C/Watt
0.21
°C/Watt
10.9
°C/Watt
2.8
°C/Watt
48
Watt-sec/°C
Vicor Corp. Tel: [phone] Fax: [phone]
V24C24C100A DC-DC Converter
Set your site on VICOR at www.vicorpower.com
Rev. 5.1
Page 1 of 8