|
V24A2C160A Datasheet, PDF (1/9 Pages) Vicor Corporation – 24Vin / 2Vout / 160Watts DC-DC Converter Module | |||
|
45
Features
⢠DC input range: 18 - 36V
⢠Input surge withstand: 50V for 100ms
⢠DC output: 2V
⢠Programmable output: 10 to 110%
⢠Regulation: ±0.2% no load to full load
⢠Efficiency: 71.6%
⢠Maximum operating temperature:
100°C at full load
⢠Power density: 32W/cubic inch
⢠Height above board: 0.43 in. (10,9 mm)
⢠Parallelable, with N+M fault tolerance
⢠Low noise ZCS/ZVS architecture
⢠Pin style: See Page 6
⢠Baseplate: See Page 7
24Vin / 2Vout / 160Watts
DC-DC Converter Module
See Page 8 for Part Numbers and Options
Shown actual size:
4.6 x 2.2 x 0.5 in
117 x 56 x 12,7 mm
(Product shown is for size only.
Pin and baseplate style may vary.
Pin style 1 and slotted baseplate are shown)
Product Overview
Absolute Maximum Ratings
This DC-DC converter module uses
2nd Generation power processing, control
and packaging technologies to provide the
performance, flexibility and cost effectiveness
expected of a mature power component.
For example, a plated-cavity core transformer
couples widely separated primary and
secondary windings, resulting in low in-to-
out parasitic capacitance and noise.
High frequency ZCS/ZVS switching,
advanced power semiconductor packaging
and thermal management provide high
power density with low temperature
gradients. Extensive use of silicon
integration results in 1/3 the part count
of a 1st Generation converter.
Parameter
+In to âIn voltage
+In to âIn voltage
PC to âIn voltage
PR to âIn voltage
+Out to âOut voltage
+Sense to âOut voltage
âSense to âOut voltage
SC to âOut voltage
Isolation voltage (in to out)
Isolation voltage (in to base)
Isolation voltage (out to base)
Storage temperature
Rating
-0.5 to +36.0
50
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +3.1
-0.5 to +3.1
1.0
-0.5 to +1.5
3000
1550
500
See Page 8
This converter is manufactured in a
state-of-the-art automated manufacturing
facility on a short-cycle-time robotic line
having a capacity of one module every ten
seconds. In-line process controls are
designed to achieve low defect rates and
consistent quality. A comprehensive CIM
system controls the dispatching, assembly
and testing of each module, enabling small
lots to be manufactured as efficiently as
hundreds-of-thousands of units.
Operating temperature
Pin soldering temperature
Pin soldering temperature
Mounting torque
See Page 8
500 (260)
750 (390)
5 (0.57)
Thermal Resistance and Capacity
Parameter
Min
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20263)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Thermal capacity
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vrms
Vrms
Vrms
°C
°C
°F (°C)
°F (°C)
in-lbs (N-m)
Notes
<100ms
125 Max
Baseplate
<5 sec; wave solder
<7 sec; hand solder
6 each, # 4-40 or M3
Typ
Max
Unit
0.08
°C/Watt
0.07
°C/Watt
4.9
°C/Watt
1.1
°C/Watt
165
Watt-sec/°C
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24Vin/2Vout/160W DC-DC Converter
Set your site on VICOR at www.vicorpower.com
Rev. 5.2
Page 1 of 9
|
▷ |