|
PR036A480T012FP Datasheet, PDF (1/13 Pages) Vicor Corporation – PRM™ Regulator | |||
|
Size:
1.91 x 1.09 x 0.37 in
48,6 x 27,7 x 9,5 mm
Applications
⢠Solid state lighting
⢠Stadium displays
⢠Industrial controls
⢠Avionics
⢠Underseas
⢠RF Amplifiers
⢠Microprocessor and DSP
requiring fast response
PRMTM Regulator
Features
⢠100°C baseplate operation
⢠Vin range: 18 â 60 Vdc
⢠Factorized Power
⢠High density: up to 156 W/in3
⢠Small footprint: 1.64 and 2.08 in2
⢠Height above board: 0.37 in (9.5 mm)
⢠Low weight: 1.07 oz (30.4 g)
⢠ZVS buck-boost regulator
⢠Typical efficiency: 95%
⢠1.35 MHz switching frequency
⢠Low noise operation
⢠Architectural flexibility
⢠Lead free wave solder compatible
⢠Agency approvals
Product Overview
The VI BRICK Pre-Regulator Module is a very efficient non-isolated regulator specifically
designed to provide a controlled Factorized Bus distribution voltage for powering
downstream VI BRICK Voltage Transformation Modules. In combination, VI BRICK PRMs
and VTMsTM form a complete DC-DC converter subsystem offering all of the unique
benefits of Vicorâs Factorized Power Architecture (FPA): high density and efficiency; low
noise operation; architectural flexibility; extremely fast transient response; elimination of
bulk capacitance at the Point-of-Load (POL); in a thermally enhanced package.
Part Numbering
PR
036 A 480
T
012
F
P
Pre-Regulator
Module
Input
Voltage
Designator
Package
Size
Output
Voltage
Designator
(=VOUT x10)
Output
Power
Designator
(=POUT /10)
Product Grade Temperatures (°C)
Grade Operating Storage
T = -40 to +100 -40 to +125
Baseplate
F = Slotted flange
T = Transverse heat sink[a]
[a]Contact factory
Pin Style
P = Through hole
Pre-Regulator Module
PR036A480T012FP
vicorpower.com
Rev. 1.1
Page 1 of 13
|
▷ |