PI31XX-00-HVMZ Datasheet, PDF (1/26 Pages) Vicor Corporation – 28VIN, 3.3 to 15VOUT, ZVS Isolated Converter Module Family

28 Volt
M Grade
PI31xx-00-HVMZ
28V_IN, 3.3 to 15V_OUT, ZVS Isolated Converter Module Family
Product Description
The ZVS Isolated Converter Module Series consists of high
density isolated DC-DC converters implementing Zero Voltage
Switching topology.
The 28V_IN series operates over a wide range input of 16V
to 50V_DC, delivering 50W of output power, yielding an
unprecedented power density of 334W/in³.
These converter modules are surface mountable and only
~.5” square in area achieving ~50% space reduction versus
conventional solutions.
Device
PI3108-00-HVMZ
PI3109-00-HVMZ
PI3106-00-HVMZ
PI3111-00-HVMZ
Output Voltage
Set
Range
3.3V
2.97 to 3.63V
5V
4 to 5.5V
12V
9.6 to 13.2V
15V
12 to 16.5V
I_OUT Max
10A
10A
4.2A
3.33A
The switching frequency of 900kHz allows for small input and
output filter components which further reduces the total size and
cost of the overall system solution. The output voltage is sensed
and fed back to the internal controller using a high performance
isolated magnetic feedback scheme which allows for high
bandwidth and good common mode noise immunity.
The PI31xx-00-HVMZ series requires no external feedback
compensation and offers a total solution with a minimum number
of external components. A rich feature set is offered, including
output voltage trim capability, output over-voltage protection,
adjustable soft-start, over-current protection with auto-restart,
over and under input voltage lockout and a temperature
monitoring and protection function that provides an analog
voltage proportional to the die temperature as well as shut down
and alarm capabilities.
Features
• Efficiency up to 88%
• High switching frequency minimizes input filter
requirements and reduces output capacitance
• Proprietary “Double-Clamped” ZVS Buck-Boost Topology
• Proprietary isolated magnetic feedback
• Small footprint (0.57in²) enables PCB area savings
• Very low profile (0.265in)
• Wide input voltage range operation (16 – 50V_DC)
• On/Off Control, positive logic
• Wide trim range +10/-20% most models
• Temperature Monitor (TM) &
Overtemperature Protection (OTP)
• Input UVLO & OVLO and output OVP
• Overcurrent protection with auto restart
• Adjustable soft-start
• 2250V_DC input to output isolation
• Surface Mountable 0.87” x 0.65” x 0.265”
Applications
• Wide Temperature, Aerospace & Defense Applications
• Space Constrained Systems
• Isolated Board Level Power
Package Information
• Surface Mountable 0.87” x 0.65” x 0.265” package
• Weight = 7.8 grams
28 Volt - M Grade
Page 1 of 26
Rev 1.6
02/2015
vicorpower.com
800 927.9474