MVTM36BF015M080A00 Datasheet, PDF (1/31 Pages) Vicor Corporation – High Efficiency, Sine Amplitude Converter

VTM^® Current Multiplier
MIL-COTS
MVTM36 Series
S
C NRTL US
High Efficiency, Sine Amplitude Converter™ (SAC™)
Features
• Family of MIL-COTs current multipliers
covering output voltages from 1 to 50 Vdc
n Operating from MIL-COTs PRM^® modules
• High efficiency reduces system power consumption
• High density provides isolated regulated system
and saves space
• VI Chip^® package enables surface mount or through hole,
low impedance interconnect to system board
• Contains built-in protection features against:
n Overvoltage
n Overcurrent
n Short Circuit
n Overtemperature
• ZVS/ZCS resonant Sine Amplitude Converter topology
• Less than 50ºC temperature rise at full load
in typical applications
Typical Applications
• Land/Air/Sea Unmanned Vehicles/Drones
• Scanning Equipment
• Radar
• Mobile Weapons
• Hybrid Vehicles
Product Ratings
V_IN = 26.0 V to 50.0 V
V_OUT = 1.0 V to 50.0 V
(various models)
P_OUT = up to 150 W
I_OUT = up to 80 A
Product Description
The VI Chip® current multiplier is a high efficiency
Sine Amplitude Converter™ (SAC™) operating from a
26 to 50 Vdc primary bus to deliver an isolated output.
The Sine Amplitude Converter offers a low AC impedance
beyond the bandwidth of most downstream regulators, which
means that capacitance normally at the load can be located
at the input to the Sine Amplitude Converter. This allows for a
reduction in point of load capacitance of typically >100x which
results in a saving of board area, materials and
total system cost.
The VTM current multiplier is provided in a VI Chip package
compatible with standard pick-and-place and surface mount
assembly processes. The co-molded VI Chip package provides
enhanced thermal management due to large thermal interface
area and superior thermal conductivity. With high conversion
efficiency the VTM current multiplier increases overall system
efficiency and lowers operating costs compared to
conventional approaches.
The VTM current multiplier enables the utilization of
Factorized Power Architecture providing efficiency and size
benefits by lowering conversion and distribution losses and
promoting high density point of load conversion.
VTM^® Current Multiplier
Page 1 of 31
Rev 1.3
07/2015
vicorpower.com
800 927.9474