MV036F120M010_10 Datasheet, PDF (1/10 Pages) Vicor Corporation – Transformer

VTM^TM
Transformer
• Isolated 1-50 Vout
• High density
• Small footprint
• ZVS / ZCS Sine Amplitude Converter^TM
• 3 MHz effective switching frequency
• Surface-mount package
• Low weight
• -55°C to 125°C operation
• 1 µs transient response
• 4.5 million hours MTBF
• Up to 96.5% efficiency
MIL-COTS
MV036 SERIES
©
Product Description
The VTM Transformer is a V•I Chip^TM product that
provides extremely fast, efficient, and quiet fixed ratio
voltage division (or current multiplication). With twelve
voltage division ratios from 1:1 to 1:32, the isolated VTM
provides the user with the flexibility to supply up to 100
A or 120 W at any output voltage from 1 to 50 Vdc in a
surface mount package occupying ~1 square inch.
The Military VTMs are optimized for use with the Military
PRM^TM Regulator to implement a Factorized Power
Architecture^TM (FPA^TM). Together, the PRM + VTM chip set
provides the full functionality of a DC-DC converter, but
with breakthrough performance and flexibility in a
rugged, miniature package. The companion PRM for the
MV036 family of VTMs is the 28 Vdc input
MP028F036M12AL, which operates from an input range
of 16-50 Vdc (the data sheet is available at
vicorpower.com). The VTM can also be used as a
standalone POL product.
By factorizing the DC-DC power conversion into its
essential elements – the VTM’s isolation and
transformation on the one hand, and the PRM’s output
voltage control and regulation on the other – and
arranging those functions in a sequence that maximizes
system performance, FPA offers a fundamentally new and
significantly improved approach to power conversion.
The VTM’s fast dynamic response and low noise eliminate
the need for bulk capacitance at the load, substantially
increasing the POL density while improving reliability and
decreasing cost. The low profile VTM (0.265 inches,
6,73 mm) is available with J-leads for surface mount or
pins for through hole applications.
Absolute Maximum Ratings
Parameter
Values
+In to -In
-1.0 to 60
100
PC to -In
-0.3 to 7.0
VC to -In
-0.3 to 19.0
+Out to -Out
Model specific
Isolation voltage
2,250
Output current
Model specific
Peak output current
1.5 • Iout
Output power
120
Peak output power
180
225
Case temperature
245
Operating junction temperature^[a] -55 to 125
Storage temperature
-65 to 125
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
A
A
W
W
°C
°C
°C
°C
Notes
For 100 ms
Contact factory
Input to Output
See Table 1
For 1 ms
For 1 ms
MSL 5
MSL 6
M - Grade
M - Grade
Note:
[a] The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by a shutdown comparator.
Part Numbering Format
MV 036 F 120 M 010
Voltage
Transformation
Module
Input Voltage
Designator
Output Voltage
Designator
(=VOUT x10)
Output Current
Designator
(=IOUT)
Configuration
F = J-lead
T = Through hole
Product Grade Temperatures (°C)
Grade Storage Operating (TJ)
M -65 to125 -55 to125
vicorpower.com 800-735-6200
V•I Chip Transformer
MV036 SERIES
Rev. 2.8
Page 1 of 10