IB050Q120T53N1-00 Datasheet, PDF (1/14 Pages) Vicor Corporation – 4:1 Intermediate Bus Converter Module: Up to 650 W Output

4:1 Intermediate Bus Converter Module: Up to 650 W Output
IB050Q120T53N1-00
Size:
2.30 x 1.45 x 0.42 in
58,4 x 36,8 x 10,6 mm
Applications
• Enterprise networks
• Optical access networks
• Storage networks
• Automated test equipment
Features
• Input: 36 – 60 Vdc
• Output: 12 Vdc at 48 Vin
• 97.8% peak efficiency
• Low profile: 0.42” height above board
• Output current: up to 53 A
• Output power: up to 650 W ^[A]
• 2,250 Vdc isolation
• Industry standard 1/4 Brick pinout
• Sine Amplitude Converter
• Low noise 1 MHz ZVS/ZCS
[A] _{For lower power applications see 300 W model IB050E120T32N1-00 or 500 W model IB050E120T40N1-00}
Product Overview
The Intermediate Bus Converter (IBC) Module is a very efficient, low profile, isolated, fixed
ratio converter for power system applications in enterprise and optical access networks.
Rated at up to 477 W from 36 Vin and up to 650 W from 50 to 60 Vin, the IBC
conforms to an industry standard quarter-brick footprint while supplying power greatly
exceeding competitive quarter-bricks. Its leading efficiency enables full load operation
at 55°C with only 200 LFM airflow. Its small cross section facilitates unimpeded airflow
— above and below its thin body — to minimize the temperature rise of downstream
components.
Absolute Maximum Ratings
Min
Max
Unit
Input voltage (+In to –In)
Notes
Operating
36
60
Vdc
Non-operating
75
Vdc
<100 mS
Input voltage slew rate
5
V/µs
EN to –IN
-0.5
20
Vdc
Output voltage (+Out to –Out)
-0.5
17.2
Vdc
Output current
53
A
Pout ≤ 650 W
Dielectric withstand
(input to output)
Temperature
2,250
Vdc
1 min.
Operating junction
-40
125
°C
Hottest Semiconductor
Storage
-55
125
°C
VI BRICK IBC Module
IB050Q120T53N1-00
vicorpower.com
Rev. 1.9
Page 1 of 14