English
Language : 

IB050Q096T64N1-CB Datasheet, PDF (1/5 Pages) Vicor Corporation – VI BRICK® IBC Customer Evaluation Board
USER GUIDE | UG:104
VI BRICK® IBC
Customer Evaluation Board
Written by: Michael DeGaetano
Associate Product Line Engineer
April 2012
Contents
Features
Introduction
Set Up
Recommended
Hardware
Thermals
Ordering Info
Page
1
1
3
Features
n Oscilloscope probe jack for output voltage and ripple measurements
n Simple to use
n Ring lug or solder connections
n Parallelable
5
5
5
Introduction
The Customer Evaluation Board offers a convenient means to evaluate the
performance of Vicor’s intermediate bus converter (IBC) and has been optimized
for user convenience. Refer to the appropriate IBC data sheet for performance and
operating limits. The data sheets are available for downloading at vicorpower.com.
It is important to remember the fast response of the IBC can readily show the
limitations of the source, load, and associated wiring connected to the evaluation
board. Care should be exercised to minimize stray source and load impedances in
order to fully exercise the IBC.
Please refer to Figure 1 for locations of the input and output connections as viewed
from the component side. Wires may be soldered directly to the pads instead of ring
lugs if desired to minimize circuit impedances.
UG:104
vicorpower.com
Applications Engineering: 800 927.9474
Page 1