IB050E120T32N1-00 Datasheet, PDF (1/13 Pages) Vicor Corporation – 4:1 Intermediate Bus Converter Module: Up to 300 W Output

4:1 Intermediate Bus Converter Module: Up to 300 W Output
IB050E120T32N1-00
Size:
2.30 x 0.9 x 0.38 in
58,4 x 22,9 x 9,5 mm
Applications
• Enterprise networks
• Optical access networks
• Storage networks
• Automated test equipment
Features
• Input: 36 – 60 Vdc
• Output: 12.0 Vdc at 48 Vin
• Output current up to 32 A
• Output power: up to 300 W ^[A]
• 2,250 Vdc isolation
• 97.6% peak efficiency
• Low profile: 0.38” height above board
• Industry standard 1/8 Brick pinout
• Sine Amplitude Converter
• Low noise 1 MHz ZVS/ZCS
[A] _{See 500W model IB050E120T40N1-00 for 98% peak efficiency.}
Product Overview
The Intermediate Bus Converter (IBC) Module is a very efficient, low profile, isolated, fixed
ratio converter for power system applications in enterprise and optical access networks.
Rated at up to 300 W from 38 to 60 Vin, the IBC conforms to an industry standard
eighth brick footprint while supplying the power of a quarter brick. Its leading
efficiency enables full load operation at 65°C with only 200 LFM airflow. Its small cross
section facilitates unimpeded airflow — above and below its thin body — to minimize
the temperature rise of downstream components.
Absolute Maximum Ratings
Min
Max
Unit
Input voltage (+In to –In)
Notes
Operating
36
60
Vdc
Non-operating
75
Vdc
<100 mS
Input voltage slew rate
5
V/µs
EN to –IN
-0.5
20
Vdc
Output voltage (+Out to –Out)
-0.5
17.2
Vdc
Output current
32
A
Pout ≤ 300 W
Dielectric withstand
(input to output)
Temperature
2,250
Vdc
1 min.
Operating junction
-40
125
°C
Hottest Semiconductor
Storage
-55
125
°C
VI BRICK IBC Module
IB050E120T32N1-00
vicorpower.com
Rev. 1.4
Page 1 of 13