FE175D480C033FP-CB Datasheet, PDF (1/20 Pages) Vicor Corporation – Complete AC-DC PCB-mounted solution

For new designs, VIA PFM AC-DC Converters » are recommended. For more information contact Vicor Applications
Engineering using this Technical Support link: www.vicorpower.com/contact-us »
VI Brick^® AC Front End
FE175D480C033FP-00
Size:
3.75 x 1.91 x 0.38 in
95,3 x 48,6 x 9,55 mm
®
C
US
S
C NRTL US
Complete AC-DC PCB-mounted solution
Features
• Complete AC-DC PCB-mounted solution
• Active Power Factor Correction (PFC)
• Rectification
• Filtering
• Transient protection
• Low profile package, 9.55mm height above board
• Power density: 121 W/in³,
330 W in 7.2 in² footprint
• Consistent high efficiency over
world-wide AC mains (85 – 264 Vac)
• Secondary-side energy storage
• SELV 48 V Output
– Efficient power distribution
to POL converters
• 3,000 Vac /4,242 Vdc isolation
• PFC (THD) exceeds EN61000-3-2
requirements
• Conducted emissions EN55022, Class B
(with a few external components)
• Surge immunity EN61000-4-5
• ZVS high frequency (MHz) switching
• Low profile, high-density filtering
• 100°C baseplate operation
Typical Applications
• LED - Lighting, display, signage
• Telecom (WiMAX, Power Amplifiers,
Optical Switches)
• Automatic Test Equipment (ATE)
• High Efficiency Server Power
• Office Equipment
(Printers, Copiers, Projectors)
• Industrial Equipment
(Process Controllers, Material
Handling, Factory Automation)
Product Overview
The VI Brick® AC Front End is an AC-to-DC converter, operating
from a universal AC input to generate an isolated and regulated
48 Vdc output with power factor correction. The module
incorporates rectification, transient and surge suppression and
AC to DC conversion to provide a complete AC to DC solution in
a thin profile package. With its ZVS high frequency Adaptive
Cell^TM topology, the VI Brick AC Front End module consistently
delivers high efficiency across worldwide AC mains.
Downstream DC-DC converters support secondary-side energy
storage and efficient power distribution, providing superior
power system performance and connectivity from the wall plug
to the point-of-load.
Nomenclature
Function
F
E
Input Voltage
Designator
175
Package
Size
D
Major Specifications
V_IN
V_OUT
P_OUT
85 – 264 V_AC
48 V_DC (isolated)
330 W
Output Voltage
Vout (V) (x10)
480
Temperature
Grade
C
Output Power
Pout (W) (–:10)
033
Baseplate
Pin
Style
F
P–
Revision
00
Universal (85 – 264 Vac)
Grade
C=
T=
M=
Operating
-20 to 100°C
-40 to 100°C
-55 to 100°C
Storage
-40 to 125°C
-40 to 125°C
-65 to 125°C
F = Slotted Flange
P = Through hole
VI Brick^® AC Front End
Page 1 of 20
Rev 2.0
07/2015
vicorpower.com
800 927.9474