DKIT-AC-24-POL-00 Datasheet, PDF (1/5 Pages) Vicor Corporation – Development Kit User Guide

USER GUIDE | UG:501
Development Kit User Guide
Mike DeGaetano
Applications Engineering
November 2015
Contents
Page
Features
1
Introduction
1
System Overview
2
Front-End (FE) Chassis
2
Hold-up Bank (HUB)
3
Point-of-Load (PoL)
3
Chassis
Set-up Instructions
3
Bill of Materials
5
Features
n From bulk power distribution to Point-of-Load in two simple steps
n Universal AC input
n Multiplicity of Point-of-Load options
n Small size, low profile, easy-to-use, highly flexible
IMPORTANT NOTICE:
Please read this user guide before operating the Vicor Development Kit.
The Development Kit is for evaluation purposes only. Compliance testing on the
Development Kit is not permissible.
Introduction
The Vicor Development Kit contains a Front-End (FE) Chassis, a Hold-up Bank (HUB),
and a Point-of-Load (PoL) Chassis. The Front End Chassis has chassis mount versions
of the AIM in a VIA package and PFM in a VIA package that may be connected to
worldwide AC mains. A HUB is included to provide proper holdup for the PFM.
The PoL Chassis has an Input Board and three Picor Cool-Power ZVS Buck Regulator
evaluation boards. The Input Board interfaces with the Front End Chassis and HUB to
provide a 24 V or 48 V voltage rail on the PoL Chassis. The included Picor regulators
provide 3.3 V, 5 V, and 12 V outputs.
Please visit www.vicorpower.com for datasheets and more information on the individual
products used in the Development Kit. Part numbers can be found in the Bill of
Materials on Page 5.
UG:501
vicorpower.com
Applications Engineering: 800 927.9474
Page 1