DCM3714XD2H53E0YZZ Datasheet, PDF (1/23 Pages) Vicor Corporation – Regulated DC Converter

DCM^™ in a VIA Package
DC-DC Converter
DCM3714xD2H53E0yzz
®
C
US
S
C NRTL US
Isolated, Regulated DC Converter
Features & Benefits
• Isolated, regulated DC-to-DC converter
• Up to 500 W, 10.42 A continuous
• 93.6% peak efficiency
• 258 W/in³ Power density
• Wide input range 200 – 420 Vdc
• Safety Extra Low Voltage (SELV) 48.0 V Nominal Output
• ZVS high frequency switching
• Allows remote sense or local sense operation
• Tight regulation over all line and load conditions
• Fully operational current limit
• OV, OC, UV, short circuit and thermal protection
• Available in chassis mount and through hole VIA package
n 3.750” x 1.400” x 0.370”
(95.13 mm x 35.5 mm x 9.30 mm)
Product Ratings
V_IN = 200 V to 420 V
V_OUT = 48.0 V
(28.8 V to 52.8 V Trim)
P_OUT = 500 W
I_OUT = 10.42 A
Product Description
The DCM in a VIA package is an Isolated, Regulated DC-to-DC
Converter, operating from an unregulated, wide range input to
generate an isolated 48.0 Vdc output. With its high frequency
zero voltage switching (ZVS) topology, the DCM converter
consistently delivers high efficiency across the input line range.
The DCM provides tight output voltage regulation and offers a
secondary-referenced control interface for trim, enable, and
remote sense operation. DCM converters and downstream
DC-DC products support efficient power distribution, providing
superior power system performance and connectivity from a
variety of unregulated power sources to the point-of-load.
The VIA package offers flexible thermal management options
with very low top and bottom side thermal impedances.
Typical Applications
• Industrial
• Process control
• Automotive
• Heavy Equipment
Part Ordering Information
Size:
3.750 x 1.400 x 0.370 in
95.13 x 35.5 x 9.30 mm
Product
Function
Package
Length
Package
Width
Package
Type
Max
Input
Voltage
Range
Ratio
Max Max
Output Output
Voltage Power
Product Grade
(Case Temperature)
Option Field
DCM
37
14
x
D2
H
53
E0
y
z
z
DCM =
DC-DC
Converter
Length in Width in B = Board VIA
Inches x 10 Inches x 10 V = Chassis VIA
Internal Reference
C = -20 to 100°C^[1]
T = -40 to 100°C^[1]
01 = Chassis/Analog
05 = Short Pin/Analog
09 = Long Pin/Analog
[1] _{High Temperature Power Derating may apply, see Thermal Specified Operating Area, Figure 1 on Page 4.}
DCM^™ in a VIA Package
Page 1 of 23
Rev 1.3
03/2016
vicorpower.com
800 927.9474