|
DCM300P120X400A40 Datasheet, PDF (1/25 Pages) Vicor Corporation – Regulated DC Converter | |||
|
DCM⢠DC-DC Converter
DCM300P120x400A40
®
S
C
US C NRTL US
Isolated, Regulated DC Converter
Features
⢠Isolated, regulated DC-DC converter
⢠Up to 400 W, 33.40 A continuous
⢠93.8% peak efficiency
⢠826 W/in3 Power density
⢠Wide input range 180 â 420 Vdc
⢠Safety Extra Low Voltage (SELV) 12.0 V Nominal Output
⢠4242 Vdc isolation
⢠ZVS high frequency switching
n Enables low-profile, high-density filtering
⢠Optimized for array operation
n Up to 8 units â 3200 W
n No power derating needed
n Sharing strategy permits dissimilar line voltages
across an array
⢠Fully operational current limit
⢠OV, OC, UV, short circuit and thermal protection
⢠4623 through-hole ChiP package
n 1.886â x 0.898â x 0.286â
(47.91 mm x 22.8 mm x 7.26 mm)
Product Ratings
VIN = 180 V to 420 V
VOUT = 12.0 V
(7.2 V to 13.2 V Trim)
POUT = 400 W
IOUT = 33.40 A
Product Description
The DCM Isolated, Regulated DC Converter is a DC-DC
converter, operating from an unregulated, wide range input to
generate an isolated 12.0 Vdc output. With its high frequency
zero voltage switching (ZVS) topology, the DCM converter
consistently delivers high eï¬ciency across the input line range.
Modular DCM converters and downstream DC-DC products
support eï¬cient power distribution, providing superior power
system performance and connectivity from a variety of
unregulated power sources to the point-of-load.
Leveraging the thermal and density beneï¬ts of Vicorâs ChiP
packaging technology, the DCM module oï¬ers ï¬exible thermal
management options with very low top and bottom side
thermal impedances. Thermally-adept ChiP based power
components enable customers to achieve cost eï¬ective power
system solutions with previously unattainable system size,
weight and eï¬ciency attributes, quickly and predictably.
Typical Applications
⢠Industrial
⢠Process control
⢠Automotive
⢠Heavy Equipment
DCM⢠DC-DC Converter
Page 1 of 24
Rev 1.2
07/2015
vicorpower.com
800 927.9474
|
▷ |