BCM6123T60E15A3T00 Datasheet, PDF (1/23 Pages) Vicor Corporation – Fixed Ratio DC-DC Converter

Features
• Up to 130 A continuous output current
• 2870 W/in³ power density
• 97.4% peak efficiency
• 2,250 Vdc isolation
• Parallel operation for multi-kW arrays
• OV, OC, UV, short circuit and thermal protection
• 6123 through-hole ChiP package
n 2.402” x 0.990” x 0.286”
(61.00 mm x 25.14 mm x 7.26 mm)
Typical Applications
• High End Computing Systems
• Automated Test Equipment
• Industrial Systems
• High Density Power Supplies
• Communications Systems
• Transportation
BCM^® Bus Converter
BCM6123x60E15A3yzz
®
S
C
US C NRTL US
Fixed Ratio DC-DC Converter
Product Ratings
V_PRI = 54 V (36 – 60 V)
V_SEC = 13.5 V (9 – 15 V)
(NO LOAD)
P_SEC= up to 1950 W
K = 1/4
Product Description
The VI Chip® Bus Converter (BCM®) is a high efficiency
Sine Amplitude Converter™ (SAC™), operating from a 36 to
60 VDC primary bus to deliver an isolated, ratiometric output
from 9 to 15 VDC.
The BCM6123x60E15A3yzz offers low noise, fast transient
response, and industry leading efficiency and power density. In
addition, it provides an AC impedance beyond the bandwidth
of most downstream regulators, allowing input capacitance
normally located at the input of a POL regulator to be located at
the primary side of the BCM module. With a primary to
secondary K factor of 1/4, that capacitance value can be
reduced by a factor of 16x, resulting in savings of board area,
material and total system cost.
Leveraging the thermal and density benefits of Vicor’s ChiP
packaging technology, the BCM module offers flexible thermal
management options with very low top and bottom side
thermal impedances. Thermally-adept ChiP-based power
components, enable customers to achieve low cost power
system solutions with previously unattainable system size,
weight and efficiency attributes, quickly and predictably.
BCM^® Bus Converter
Page 1 of 23
Rev 1.1
09/2015
vicorpower.com
800 927.9474