BCM48BX040Y200B00 Datasheet, PDF (1/20 Pages) Vicor Corporation – High efficiency (>94%) reduces system

Features & Benefits
• 48V_DC – 4V_DC 200W Bus Converter
• High efficiency (>94%) reduces system
power consumption
• High power density (>681W/in³)
reduces power system footprint by >40%
• Contains built-in protection features:
n Undervoltage
n Overvoltage Lockout
n Overcurrent Protection
n Short circuit Protection
n Overtemperature Protection
• Provides enable/disable control,
internal temperature monitoring
• Can be paralleled to create multi-kW arrays
Typical Applications
• High End Computing Systems
• Automated Test Equipment
• High Density Power Supplies
• Communications Systems
Typical Application
BCM^® Bus Converter
BCM48Bx040y200B00
®
C
US
S
C NRTL US
Isolated Fixed Ratio DC-DC Converter
Product Ratings
V_IN = 48V (38 – 55V)
V_OUT = 4V (3.2 – 4.6V)
(no load)
P_OUT= up to 200W
K = 1/12
Description
The VI Chip^® bus converter is a high efficiency (>94%) Sine
Amplitude Converter™ (SAC™) operating from a 38 to 55V_DC
primary bus to deliver an isolated, ratiometric output voltage from
3.2 to 4.6V_DC. The Sine Amplitude Converter offers a low AC
impedance beyond the bandwidth of most downstream regulators;
therefore capacitance normally at the load can be located at the
input to the Sine Amplitude Converter. Since the transformation
ratio of the BCM48Bx040y200B00 is 1/12, the capacitance value
can be reduced by a factor of 144x, resulting in savings of board
area, materials and total system cost.
The BCM48BF040y200B00 is provided in a VI Chip package
compatible with standard pick-and-place and surface mount
assembly processes. The co-molded VI Chip package provides
enhanced thermal management due to a large thermal interface
area and superior thermal conductivity. The high conversion
efficiency of the BCM48Bx040y200B00 increases overall system
efficiency and lowers operating costs compared to conventional
approaches.
Part Numbering
Product Number
BCM48Bx040y200B00
Package Style (x)
F = J-Lead
T = Through hole
Product Grade (y)
T = -40° to 125°C
M = -55° to 125°C
For Storage and Operating Temperatures see General Characteristics
enable / disable
switch
PC
TM
L
SW1
BCM^®
O
Bus Converter
F1
+IN
+OUT
A
V_IN
D
-IN
-OUT
BCM^® Bus Converter
Page 1 of 20
Rev 1.3
08/2016
vicorpower.com
800 927.9474