B384F120T30_10 Datasheet, PDF (1/12 Pages) Vicor Corporation – Bus Converter

B384F120T30
BCM^TM
Bus Converter
• 384 V to 12 V V•I Chip^TM Converter
• 300 Watt (450 Watt for 1 ms)
• High density – up to 1017 W/in³
• Small footprint – 260 W/in²
• Low weight – 0.5 oz (15 g)
• ZVS / ZCS isolated sine
amplitude converter
• Typical efficiency 95%
• 125°C operation (T_J)
• <1 µs transient response
• >3.5 million hours MTBF
• No output filtering required
©
Vin = 360 - 400 V
Vout = 11.3 - 12.5 V
Iout = 25 A
K = 1/32
Rout = 20.0 mΩ max
Product Description
The V•I Chip bus converter is a high efficiency (>95%),
narrow input range Sine Amplitude Converter^TM (SAC^TM)
operating from a 360 to 400 Vdc primary bus to deliver
an isolated low voltage secondary (ELV).
The off-line BCM provides an isolated 11.3 -12.5 V
distribution bus and is ideal for use in silver boxes and
PFC front ends. Due to the fast response time and low
noise of the BCM, the need for limited life aluminum
electrolytic or tantalum capacitors at the input of POL
converters is reduced—or eliminated—resulting in
savings of board area, materials and total system cost.
The BCM achieves a power density of 1017 W/in³ in
a V•I Chip package compatible with standard pick-and-
place and surface mount assembly processes. The
V•I Chip package provides flexible thermal management
through its low junction-to-case and junction-to-board
thermal resistance. Owing to its high conversion
efficiency and safe operating temperature range, the
BCM does not require a discrete heat sink in typical
applications. Low junction-to-case and junction-to-lead
thermal impedances assure low junction temperatures
and long life in the harshest environments.
Absolute Maximum Ratings
Parameter
+In to -In
PC to -In
+Out to -Out
Isolation voltage
Output current
Peak output current
Output power
Peak output power
Case temperature
Operating junction temperature⁽¹⁾
Storage temperature
Values
-1.0 to 440
500
-0.3 to 7.0
-0.5 to 16.0
4242
27.7
37.5
300
450
225
245
-40 to 125
-40 to 125
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
A
A
W
W
°C
°C
°C
°C
Notes
For 100 ms
Input to Output
Continuous
For 1 ms
Continuous
For 1 ms
MSL 5
MSL 6
T-Grade
T-Grade
Note:
(1) The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by a shutdown comparator.
Part Numbering
B 384 F 120 T 30
Bus Converter
Module
Input Voltage
Designator
Output Voltage
Designator
(=VOUT x10)
Output Power
Designator
(=POUT /10)
Configuration
F = J-lead
T = Through hole
Product Grade Temperatures (°C)
Grade Storage Operating (TJ)
T
-40 to125 -40 to125
vicorpower.com 800-735-6200
V•I Chip Bus Converter
B384F120T30
Rev. 2.4
Page 1 of 12