B048K120T30 Datasheet, PDF (1/15 Pages) Vicor Corporation – VI Chip - BCM Bus Converter Module

BCM
PRELIMINARY
V•I Chip Voltage Transformation Module
V•I Chip^TM – BCM
Bus Converter Module
• 48 V to 12 V V•I Chip Converter
• 300 Watt (450 Watt for 1 ms)
• High density – 1200 W/in³
• Small footprint – 280 W/in²
• Low weight – 0.5 oz (14 g)
• ZVS/ZCS isolated sine
amplitude converter
• 96% efficiency
• 125°C operation
• <1 µs transient response
• 3.5 million hours MTBF
• No output filtering required
• Surface mount BGA or J-Lead
packages
B048K120T30
K indicates BGA configuration. For other
mounting options see Part Numbering below.
©
Vin = 38 - 55 V
Vout = 9.5 - 13.7 V
Iout = 25 A
K = 1/4
Rout = 13.9 mΩ max
Actual size
Product Description
The V•I Chip Bus Converter Module (BCM) is a high
efficiency (>96%), narrow input range Sine Amplitude
Converter (SAC) operating from a 38 to 55 Vdc primary
bus to deliver an isolated 9.5 V to 13.7 V secondary. The
BCM may be used to power non-isolated POL converters
or as an independent 9.5 – 13.7 V source. Due to the
fast response time and low noise of the BCM, the need
for limited life aluminum electrolytic or tantalum
capacitors at the input of POL converters is reduced—or
eliminated—resulting in savings of board area, materials
and total system cost.
The BCM achieves a power density of 1200 W/in³ and
may be surface mounted with a profile as low as 0.16"
(4 mm) over the PCB. Its V•I Chip power package is
compatible with onboard or inboard surface mounting.
The V•I Chip package provides flexible thermal
management through its low Junction-to-Case and
Junction-to-BGA thermal resistance. Owing to its high
conversion efficiency and safe operating temperature
range, the BCM does not require a discrete heat sink in
typical applications. It is also available with heat sink
options, assuring low junction temperatures and long
life in the harshest environments.
Absolute Maximum Ratings
Parameter
Values
+In to -In
-1.0 to 60
+In to -In
100
PC to -In
-0.3 to 7.0
+Out to -Out
-0.5 to 30.0
Isolation voltage
2,250
Output current
25
Peak output current
37.5
Output power
300
Peak output power
450
Case temperature
208
Operating junction temperature⁽¹⁾ -40 to 125
-55 to 125
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
A
A
W
W
°C
°C
°C
Notes
For 100 ms
Input to Output
Continuous
For 1 ms
Continuous
For 1 ms
During reflow
T - Grade
M - Grade
Storage temperature
-40 to 150
-65 to 150
°C
T - Grade
°C
M - Grade
Note:
(1) The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by a shutdown comparator.
Part Numbering
B 048 K
Bus Converter Input Voltage
Module
Designator
Configuration Options
F = Onboard (Figure 20)
K = Inboard (Figure 19)
120 T
Output Voltage
Designator
(=VOUT x10)
30
Output Power
Designator
(=POUT/10)
Product Grade Temperatures (°C)
Grade Storage Operating
T -40 to150 -40 to125
M -65 to150 -55 to125
vicorpower.com 800-735-6200
V•I Chip Bus Converter Module
B048K120T30
Rev. 1.0
Page 1 of 16