B048F060T24-EB Datasheet, PDF (1/12 Pages) Vicor Corporation – BCM® Bus Converter

End of Life - Replaced by BCM48Bx060y240A00
BCM^® Bus Converter
B048F060T24
B048F060M24
S
C NRTL US
Narrow Input Range Sine Amplitude Converter™
• 48 V to 6 V VI Chip^® Bus Converter
• 240 Watt (360 Watt for 1 ms)
• Typical efficiency 95%
• 125°C operation (T_J)
VIN = 38 - 55 V
VOUT = 4.75 - 6.87 V
• High density – 813 W/in³
• <1 µs transient response
IOUT = 40 A
• Small footprint – 210 W/in²
• 3.5 million hours MTBF
K = 1/8
• Low weight – 0.5 oz (15 g)
• No output filtering required
ROUT = 8.1 mΩ max
©
• ZVS / ZCS isolated Sine
Amplitude Converter™
Product Description
The VI Chip^® bus converter is a high efficiency (>95%),
narrow input range Sine Amplitude Converter^TM (SAC^TM)
operating from a 38 to 55 Vdc primary bus to deliver an
isolated 4.75 V to 6.87 V secondary. The bus converter
may be used to power non-isolated POL converters or as
an independent 4.75 – 6.87 V source. Due to the fast
response time and low noise of the bus converter, the
need for limited life aluminum electrolytic or tantalum
capacitors at the load is reduced—or eliminated—
resulting in savings of board area, materials and total
system cost.
The bus converter achieves a power density of 813 W/in³
in a VI Chip package compatible with standard pick-and-
place and surface mount assembly process. The
VI Chip package provides flexible thermal management
through its low junction-to-board and junction-to-case
thermal resistance. Owing to its high conversion
efficiency and safe operating temperature range, the bus
converter does not require a discrete heat sink in typical
applications. Low junction-to-case and junction-to-lead
thermal impedances assure low junction temperatures
and long life in the harshest environments.
Absolute Maximum Ratings
Parameter
+In to -In
PC to -In
+Out to -Out
Isolation voltage
Output current
Peak output current
Output power
Peak output power
[a]
Case temperature during reflow
[b]
Operating junction temperature
Storage temperature
Values
-1.0 to 60
100
-0.3 to 7.0
-0.5 to 12
2,250
46.5
60.0
240
360
225
245
-40 to 125
-55 to 125
-40 to 125
-65 to 125
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
A
A
W
W
°C
°C
°C
°C
°C
°C
Notes
For 100 ms
Input to output
Continuous
For 1 ms
Continuous
For 1 ms
MSL 5
MSL 6, TOB = 4 hrs
T-Grade
M-Grade
T-Grade
M-Grade
Notes:
[a] 245°C reflow capability applies to product with manufacturing date code 1001 and greater.
[b] The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by a shutdown comparator.
Part Numbering
B 048 F 060
T
24
Bus Converter
Input Voltage
Designator
Output Voltage
Designator
(=V_OUT x10)
Output Power
Designator
(=P_OUT /10)
Configuration
F = J-lead
T = Through hole
Product Grade Temperatures (°C)
Grade Storage Operating (T_J)
T -40 to125 -40 to125
M -65 to 125 -55 to 125
BCM^® Bus Converter
Page 1 of 12
Rev 3.3
06/2014
vicorpower.com
800 927.9474