VS-501_12 Datasheet, PDF (6/6 Pages) Vectron International, Inc – Voltage Controlled SAW Oscillator

Ordering Information
VS - 501 0 - D E X - 205 X - 1747M030837
Product Family
VS: VCSO
Package
9x14mm SMT
Height
0: 2.8mm (G218C) (<1.7GHz, Sinewave only)
1: 4.9mm (G218H)
Supply Voltage
D: +5.0V
E: +3.3V
RF Output Code
C: LVPECL
E: Sinewave
F: Balanced Sinewave
APR Code
205: ±20ppm
Temperature Range
X: +10°C to +85°C
Standard Frequencies (MHz)
1701.32
1707.08
1747.030837
1747.62305
1748.366885
1986.819383
2457.6
Other Frequencies Available Upon Request
1769.145
Frequency
Enable
X: No Enable
1968.75
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
USA:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: [phone]
Fax: [phone]
For Additional Information, Please Contact
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: [phone]
Fax: [phone]
Asia:
Vectron International
1589 Century Avenue, the 19th Floor
Chamtime International Financial Center
Shanghai, China
Tel: [phone]
Fax: [phone]
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 07/2012
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
6 of 6