TX-508 Datasheet, PDF (5/6 Pages) Vectron International, Inc – Temperature Compensated Crystal Oscillator

Standard Shipping Method (TX-508)
A
X
Lage im Gurt
Position in tape
Pin 1
Abwickelrichtung
Unwinding direction
B
K
P ^{*bei W ≤ 24 mm nur untere Lochreihe}
∗by W ≤ 24 mm only lower hole line
Gurtunterseite
Tape buttom side
Gurtoberseite
Tape upper side
Enclosure Type
G301
Tape Width W (mm)
24
Quantity per meter
83,3
Quantity per reel
850
Recommended Reflow Profile
Dimension P
12
Profile Feature
Pb-Free Assembly/
Sn-Pb Assembly
Profile Feature
Average ramp-up rate (T to T )
L
P
Preheat -Temperature Min T
Smin
-Temperature Min T_Smax
-Time (min to max) t
S
TSmax to TL -Ramp-up Rate
3°C/second max.
150°C
200°C
60-180 seconds
3°C/second max
Time 25°C to Peak Temperature
Time maintained above
-Temperature (T_L)
-Time (t )
L
Time maintained above
-Temperature (T )
L
-Time (t )
L
Peak Temperature (T )
P
217°C
60-150 seconds
max 260°C
Time within 5°C of actual Peak
Temperature (t )
P
Ramp-down Rate
Note: All temperatures refer to topside of the package, measured on the package body surface.
Pb-Free Assembly/
Sn-Pb Assembly
8 minutes max.
217°C
60-150 seconds
20-40 seconds
6°C/ second max
Page 5 of 6
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com