MV-9400A Datasheet, PDF (5/6 Pages) Vectron International, Inc – Any frequency between 1 MHz and 220 MHz with 6 decimal places of accuracy

Absolute Maximum RaƟngs and Test Compliance
Maximum RaƟngs
Parameter
Storage Temperature
VDD
Electrosta c Discharge
Soldering Temperature (follow standard Pb free soldering guidelines)
Program Reten on over -40 to 125°C, Process, Vdd (0 to 3.65 V)
Min.
-65
-0.5
–
–
1,000+
Max. Unit
150 °C
4V
2000 V
260 °C
- Years
Environmental Compliance
Parameter
Condi on/Test Method
Mechanical Shock
MIL-STD-883F, Method 2002
Mechanical Vibra on
MIL-STD-883F, Method 2007
Temperature Cycle
JESD22, Method A104
Solderability
MIL-STD-883F, Method 2003
Moisture Sensi vity Level
MSL1 @ 260°C
Ordering InformaƟon
MV - 9400A E - C 3 F - E E K 156M250000
Product
MV: MEMS VCXO
Family
9400A: Differen al VCXO, 1-220MHz
Temp Range
J: -20/70°C
E: -40/85°C
Frequency
Feature Pin
E: Ouput Enable
Pull Range (APR)
K: 50ppm
P: 80ppm
S: 100ppm
Supply Voltage
E: +3.3 Vdc
H: +2.5 Vdc
Output
C: LVPECL
D: LVDS
Package
1: 7.0 x 5.0 mm, 6 pin
3: 5.0 x 3.2mm, 6 pin
Stability
E: ±20ppm
F: ±25ppm
K: ±50ppm
Notes:
1. Not all op ons and codes are available at all frequencies.
2. Unless otherwise stated all values are valid a er warm-up me and refer to typical condi ons for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Subject to technical modifica on.
4. Contact factory for availability.
Page 5 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014