MO-9250A Datasheet, PDF (5/6 Pages) Vectron International, Inc – 200-625 MHz High Performance Differential Oscillator

Absolute Maximum RaƟngs and Test Compliance
Maximum RaƟngs
Parameter
Storage Temperature
VDD
Electrosta c Discharge
Soldering Temperature (follow standard Pb free soldering guidelines)
Min. Max. Unit
-65 150 °C
-0.5 4
V
– 2000 V
– 260 °C
Environmental Compliance
Parameter
Condi on/Test Method
Mechanical Shock
MIL-STD-883F, Method 2002
Mechanical Vibra on
MIL-STD-883F, Method 2007
Temperature Cycle
JESD22, Method A104
Solderability
MIL-STD-883F, Method 2003
Moisture Sensi vity Level
MSL1 @ 260°C
Ordering InformaƟon
MO - 9250A E - C 3 F - E E 312M500000
Product
MO: MEMS XO
Family
9250A: Differen al clock, 220-625MHz
Frequency
Feature Pin
E: Enable/Disable
Temp Range
J: -20/70°C
E: -40/85°C
Supply Voltage
E: +3.3 Vdc, ±5%
H: +2.5 Vdc, ±5%
Output
C: LVPECL
D: LVDS
Package
1: 6 pin 7.0mm x 5.0mm
3: 6 pin 5.0mm x 3.2mm
5: 6 pin 3.2mm x 2.5mm
Stability
E: ±20ppm
F: ±25ppm
K: ±50ppm
Notes:
1. Contact factory for improved stabili es or addi onal product
op ons. Not all op ons and codes are available at all
frequencies.
2. Unless otherwise stated all values are valid a er warm-up me and
refer to typical condi ons for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Subject to technical modifica on.
4. Contact factory for availability.
Range 1
Range 2
Range 3
Range 4
Frequency Ranges Not Supported
209.000001 MHz to 210.999999 MHz
251.000001 MHz to 263.999999 MHz
314.00001 to 422.999999 MHz
502.000001 to 527.999999 MHz
Disclaimer
Vectron Interna onal reserves the right to make changes to the product(s) and or informa on contained herein without no ce. No liability is assumed as a result of their use or applica-
on. No rights under any patent accompany the sale of any such product(s) or informa on.
Page 5 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014