C5315 Datasheet, PDF (4/4 Pages) Vectron International, Inc – 2, 5, 10 Gbit/s standard Sonet / SDH

Recommended Reflow Profile
C5315
VCSO
SMD oscillators must be on the top side of the
PCB during the reflow process.
How to Order this Product:
Step 1 Use this worksheet to forward the following information to your factory representative:
Model
Stability Code
Supply Voltage Code
RF Output Code
C5315
Example: C5315
SV033
RFP
Package Code
A1
Step 2 The factory representative will then respond with a Vectron Model Number in the following Configuration:
Model
C5315
Typical P/N = C5315A1-0001
Package Code
[Customer Specified Package Code]
Dash
-
Dash Number
[Factory Generated 4 digit number]
Notes:
1
2
3
4
5
Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies.
Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control
voltage, load, temperature (25°C)
Phase noise degrades with increasing output frequency.
Subject to technical modification.
Contact factory for availability.
Vectron International · www.vectron.com
Vectron International
Headquarters
267 Lowell Road
Hudson, New Hampshire 03051
[phone] tel
[phone] fax
Vectron International LLC.
100 Watts Street
Mount Holly Springs, PA 17065
USA
[phone] tel
[phone] fax
Vectron international GmbH & Co. KG
Landstrasse
D-74924 Neckarbischofsheim
Germany
[phone] tel
[phone] fax
v.2005-02-10 · page 4 of 4
Vectron Asia Pacific Sales Office
Unit 3119 31st Floor, Jin Mao Tower, 88
Century Boulevard, Shanghai,
P.R. China 200120
[phone] tel.
[phone] fax