TFS807 Datasheet, PDF (3/5 Pages) Vectron International, Inc – Vectron International Filter specification

Filename: tfs 807.doc
Vectron International
Version 2.0
Filter specification
TFS 807
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10Hz to 500Hz, 0.35mm or 5g respectively, 1 octave per min, 10 cycles per
plane, 3 planes; DIN IEC 68 T2 - 6
3. Change of
temperature:
-55°C to 125°C / 15min. each / 100 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions, see page 4: "Air reflow temperature conditions"
This filter is RoHS compliant (2011/65/EU)
13.09.2013
3/5
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
Pull Off Direction
3000
min. 300 mm
min. 500 mm
min. 300 mm
t
Tape (all dimensions in mm)
W
: 8,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 3,50 ± 0,05
G(min) : 0,75
Ko
P2
: 2,00 ± 0,05
P1
: 4,00 ± 0,1
D1(min) : 1,50
Ao
: 3,25 ± 0,1
Bo
: 3,25 ± 0,1
Ct
: 5,3 ± 0,1
Do
PIN Marker
P1
Po
P2
Date Code
Typ
D1
Ao
W2
Reel (all dimensions in mm)
A
: 180
C
A
W1
: 8,4 +1,5/-0
N
W2(max) : 14,4
N(min) : 60
C
: 13,0 ± 0,2
W1
The minimum bending radius is 45 mm.
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.