TFS622 Datasheet, PDF (3/4 Pages) Vectron International, Inc – Filter Specification

t_{_}fs_{_}6_{_}2_{_}2_{_}.d_{_}o_{_}c_{_________________________________________v_e_r_s_io_n__1_.1________________________________0_6_._0_1_.0_2________}
V_{__}I_{__}T_{_}E_{__}L_{_}E_{__}F_{_}I_{_}L_{__}T_{_}E_{__}R_{_______________________}F_{__}i_{_}lt_{_}e_{__}r_{_}S_{__}p_{_}e_{__}c_{_}i_{_}f_{_}ic_{__}a_{_}t_{_}i_{_}o_{_}n_{______________}T_{__}F_{_}S_{___}6_{__}2_{_}2_{_____}P_{_}a_{__}g_{_}e_{__}3_{___}/ _{_}4_{___}
2. Vibration:
3. Damp heat:
(steady state)
4. Resistance to
solder heat (reflow):
10 Hz to 500 Hz, 0,035 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
90 % to 95 % rel. humidity, 55 °C, 10 days;
DIN IEC 68 - 2 - 30
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel: 3000
Tape (all dimensions in mm)
W
: 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,5
D1 : 1,5 + 0,5
E
: 1,75 ± 0,1
F
: 7,5 ± 0,1
G (min) : 0,75
P2 : 2 ± 0,05
P1 : 8 ± 0,1
D1(min) : 1,5
Ao : 5,4 ± 0,1
Bo : 7,4 ± 0,1
13,4 ± 0,1
COVER TAPE
EMBOSSED CARRIER TAPE
Do
Po
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A
:
330
W1
:
W2 (max) :
16,4 +2
22,4
N (min)
: >= 90
C
C
:
13
± 0,25 ^A
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
______________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.