TFS465G Datasheet, PDF (3/5 Pages) Vectron International, Inc – VI TELEFILTER Filter specification

Filename: tfs 465g.doc
VI TELEFILTER
Version 1.3
Filter specification
TFS 465G
Stability characteristics, reliability
100% Screening Tests :
After the following tests the filter shall meet the whole specification. Electrical tests after test 4, test 5 and 7.
1. Internal Visual Inspection: according to MIL-STD-883 method 2017
2. Stabilization Bake:
16 hrs at 125°C under Vacuum according to MIL-STD-883 Method 1008 Condition B
3. Temperature Cycling:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N equivalent MIL-STD-202 Method 107
4. Burn-in:
160 hrs at 125°C ( no input power ) according to MIL-STD-883 Method 1015
5. Seal test:
gross leak bubble test – Fluorocarbon liquid at 125°C ± 5°C
MIL-STD-202 Method 112 Condition D
Fine leak spot test – Helium detector according to MIL-STD-202 Method 112 Condition C
6. External Visual Inspection: according to MIL-STD-883 method 2009
Qualification Tests :
1. Resistance to
solder heat (reflow):
2. Vibration:
3. Shock:
7. Radiation:
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
10 Hz to 2000 Hz, 1,5 mm or max 20g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 2 – 6
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27 ,
100 krad , ESCC Detail Specification No.22900
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
Pull Off Direction
3000
min. 300 mm
min. 500 mm
min. 300 mm
Tape (all dimensions in mm)
W
: 12,00 ± 0,3
Po
: 4,00 ± 0,1
t
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 5,50 ± 0,05
G(min) : 0,75
P2
: 2,00 ± 0,05
P1
: 8,00 ± 0,1
D1(min) : 1,50
Ao
: 4,30 ± 0,1
Ko
Bo
: 4,30 ± 0,1
Ct
: 9,5 ± 0,1
P1
Date Code
Do
Po
P2
Typ
PIN Marker
D1
Ao
W2
18.10.2007
3/5
Reel (all dimensions in mm)
A
: 330
W1
: 12,4 +2/-0
C
A
W2(max) : 18,4
N
N(min) : 50
C
: 13,0 +0,5/-0,2
W1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D-14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.