English
Language : 

TFS460B Datasheet, PDF (3/4 Pages) Vectron International, Inc – SAW filter specification
◁
f_il_e:_T_F_S_4_6_0_b_.e_n_g_________________________________________________________________v_e_rs_io_n__2._1____________4_/_9_8___
V__I__T__E_L__E__F_I_L_T__E_R____________________S__A_W____f_i_lt_e__r__s_p__e_c__if_i_c_a__ti_o__n_______________T_F__S___4_6__0__B_____3_/_4____
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
100g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0.35 mm amplitude, 5g; 2 hours for 3 planes;
DIN IEC 68 T2 - 6
3. Damp heat:
90 % to 95 % rel. humidity, 40 °C, 10 days;
IEC Pub. 68 - 2 - 3
4. Resistance to
solder heat (Reflow):
260 °C for 10 sec;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel: 3400
Tape (all dimensions in mm)
W
: 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,5
D1 : 1,5 + 0,5
E
: 1,75 ± 0,1
F
: 7,5 ± 0,1
G (min) : 0,75
P2 : 2 ± 0,05
P1 : 8 ± 0,1
D1(min) : 1,5
Ao : 5,4 ± 0,1
Bo : 7,4 ± 0,1
13,4 ± 0,1
COVER TAPE
EMBOSSED CARRIER TAPE
Do
Po
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A
:
330
W1
:
W2 (max) :
16,4 +2
22,4
N (min)
: >= 90
C
C
:
13
± 0,25 A
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
______________________________________________________________________________________________________
VI TELEFILTER / Potsdamer Straße 18 / D 14 513 TELTOW
Phone: (+33 28) 47 84 52 / Facsimile: (+33 28) 47 84 30 / e-mail: tft@telefilter.com
file: TFS460b.eng
version 2.1
4/98
 ▷