TFS433B Datasheet, PDF (3/5 Pages) Vectron International, Inc – Filter specification

t_{_}fs_{_}4_{_}3_{_}3_{_}b_{_}.d_{_}o_{_}c_{____________________________________}ve_{_}r_{_}s_{_}io_{_}n_{_}1_{_}.3_{___________________________________________}0_{_}6_{_}._{_}01_{_}._{_}0_{_}2_{___}
V_{__}I_{__}T_{__}E_{_}L_{__}E_{__}F_{_}I_{_}L_{_}T_{__}E_{_}R_{________________________}F_{_}i_{_}lt_{_}e_{__}r_{_}s_{__}p_{_}e_{__}c_{_}i_{_}f_{_}ic_{__}a_{_}t_{_}i_{_}o_{_}n_{_____________________}T_{_}F_{__}S_{__}4_{__}3_{_}3_{__}B_{____}3_{_}/_{_}5_{____}
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
______________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.