TFS400C2 Datasheet, PDF (3/5 Pages) Vectron International, Inc – SAW Filter Specification

t_{_}fs_{_}4_{_}0_{_}0_{_}c_{_}2._{_}d_{_}o_{_}c _{_______________________________________________________________________}v_{_}e_{_}rs_{_}i_{_}on_{__}1_{_}.0_{_____}2_{_}3._{_}0_{_}5_{_}.2_{_}0_{_}0_{_}0_{__}
V_{__}I_{__}T_{_}E_{__}L_{__}E_{_}F_{__}IL_{__}T_{_}E_{__}R_{____________________}S_{__}A_{_}W_{____}F_{__}il_{_}t_{_}e_{_}r_{__}S_{_}p_{__}e_{_}c_{__}if_{_}i_{_}c_{_}a_{__}t_{_}io_{__}n_{___________}T_{__}F_{_}S_{___}4_{_}0_{_}0_{__}C_{__}2_{_________}3_{_}/_{_}5_{__}
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Real of empty components at start:
Real of empty components at start including leader:
Trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
W
: 12 ± 0,3
Po
: 4 ± 0,1
Do
: 1,5 + 0,1
E
: 1,75 ± 0,1
F
: 5,5 ± 0,05
G (min) : 0,75
P2
: 2 ± 0,05
CT
P1
: 8 ± 0,1
D1(min) : 1,5
Ao
: 5,3 ± 0,1
Bo
: 5,3 ± 0,1
CT
: 9,5 ± 0,1
COVER TAPE
EMBOSSED CARRIER TAPE
Do
Po
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A
:
330
W1
:
W2 (max) :
12,4 + 0,2
18,4
N (min)
:
50
C
C
:
13
± 0,2 ^A
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.