TFS341C Datasheet, PDF (3/5 Pages) Vectron International, Inc – Vectron International Filter specification

Filename: tfs 341c.doc
VI TELEFILTER
Version 1.4
Filter specification
TFS 341C
05.09.2007
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
1700
min. 300 mm
min. 500 mm
min. 300 mm
Tape (all d im e nsion s in m m )
W
: 32
± 0,3
Po
: 4 ± 0,1
Do
: 1,5 + 0,5
E
:
1,75 ± 0,1
S0
: 28,4 ± 0,1
P2
:
2 ± 0,1
P1
: 12 ± 0,1
D 1(m in) : 1,5
Ao
: 7,1 ± 0,1
Bo
: 19.6 ± 0,1
Ko
: 2,0 ± 0,1
t
: 0,35 ± 0,05
Ct
: 25,5 ± 0,1
X-X
t
Ko
Reel (all dimensions in mm):
A
: 330
W1
:
W2 (max) :
32,4 +2
38,4
N (min) : 100
C
: 13 +0,5/-0,2
A
pull off direction
Po
P1
Do
P2
D1
Ao
C
X
view direction
X
SPEC-Gurt 0061/ 19X6,5
Q09016:02.001
Jul.10,01
W2
N
W1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.