TFS330A Datasheet, PDF (3/5 Pages) Vectron International, Inc – Vectron International Filter specification

Filename: tfs 330a.doc
VI TELEFILTER
Version 1.2
Filter specification
TFS 330A
08.08.2007
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
5. ESD
ANSI/ESD S20.20-1999, class 1A for HBM
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
1700
min. 300 mm
min. 500 mm
min. 300 mm
T ap e (all d im e n sion s in m m )
W
: 32
± 0,3
Po
: 4 ± 0,1
Do
: 1,5 + 0,5
E
: 1,75 ± 0,1
S0
: 28,4 ± 0,1
P2
:
2 ± 0,1
P1
: 12 ± 0,1
D 1 (m in ) : 1,5
Ao
: 7,1 ± 0,1
-
Bo
: 19.6 ± 0,1
Ko
: 2,0 ± 0,1
t
: 0,35 ± 0,05
Ct
: 25,5 ± 0,1
Reel (all dimensions in mm):
A
: 330
W1
:
W2 (max) :
32,4 +2
38,4
N (min) : 100
C
:
13 +0,5/-0,2
A
$ ## %%&'() ' *
+'(, &'() ' *
!
"#
W2
C
N
W1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail:
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.