TFS270C Datasheet, PDF (3/4 Pages) Vectron International, Inc – Filter specification

T_{_}F_{_}S_{_}2_{_}7_{_}0C_{_}._{_}do_{_}c_{________________________________________________________________}V_{_}e_{_}r_{_}si_{_}o_{_}n_{_}1_{_}.0_{_________}0_{_}6_{_}.0_{_}1_{_}._{_}02_{_____________}
V_{__}I_{__}T_{_}E_{__}L_{_}E_{__}F_{_}I_{_}L_{__}T_{_}E_{__}R_{_______________________}F_{__}i_{_}lt_{_}e_{__}r_{_}s_{__}p_{_}e_{_}c_{__}i_{_}fi_{_}c_{_}a_{__}t_{_}io_{__}n_{_______________________}T_{_}F_{__}S_{__}2_{_}7_{__}0_{__}C_{________}3_{_}/_{_}4_{__}
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
100g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,075 mm or 1g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(steady state)
90 % to 95 % rel. humidity, 40 °C, 10 days;
DIN IEC 68 - 2 - 3
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel: 3400
Tape (all dimensions in mm)
W
: 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,5
D1 : 1,5 + 0,5
E
: 1,75 ± 0,1
F
: 7,5 ± 0,1
G (min) : 0,75
P2 : 2 ± 0,05
P1 : 8 ± 0,1
D1(min) : 1,5
Ao : 5,4 ± 0,1
Bo : 5,4 ± 0,1
13,4
± 0,1
COVER TAPE
Reel (all dimensions in mm):
A
:
330
W1
:
W2 (max) :
16,4 +2
22,4
N (min)
C
: >= 90
:
13
± 0,25 ^A
EMBOSSED CARRIER
TAPE
Do
Po
P2
Ao
D1
Bo
P1
C
E
F
W
G
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The
marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right
side of the tape.
__________________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
______________________________________________________________________________________________________
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.