TFS248E Datasheet, PDF (3/5 Pages) Vectron International, Inc – Filter specification

Tfs248e.doc
VI TELEFILTER
version 6.0
Filter specification
08.04.2002
TFS 248 E
3/5
Stability Characteristics
After the following tests, the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
4;
reflow possible: twice max.;
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page
Packing
Tape & Reel:
Tape (all dimensions in mm)
W
: 32 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,1
E
: 1,75 ± 0,1
F
: 14,2 ± 0,1
P2 : 2 ± 0,1
P1 : 12 ± 0,1
Ct
D1(min) : 2,0
Ao : 7,1 ± 0,1
Bo : 19.6 ± 0,1
t
: 0,35 ± 0,05
Ct
: 25,5 ± 0,1
DIN IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
2000
min 300 mm
min 500 mm
min 300 mm
EMBOSSED CARRIER TAPE
Do
Po
P2
Ao
D1
Bo
Ko
t
E
F
W
COVER TAPE
G
P1
Reel (all dimensions in mm):
A
:
W1
:
W2 (max) :
N (min) :
C
:
330
32,4 +2
38,4
100
13 + 0,5/-0,2
C
A
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.