TFS156D Datasheet, PDF (3/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs156d.doc
Vectron International
Version 2.1
Filter specification
TFS156D
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0.35 mm or 5 g respectively, 1 octave per min, 10 cycles per
plane, 3 planes; DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 15 min. each / 100 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions, see page 4: "Air reflow temperature conditions"
5. ESD
ANSI/ESD S20.20-1999, class 1A for HBM
This filter is RoHS compliant (2011/65/EU)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
2000
min. 300 mm
min. 500 mm
min. 300 mm
Tape (all dimensions in mm)
W
:16.00 ± 0.3
Po
:4.00 ± 0.1
t
Do
:1.50 +0.1/-0
E
:1.75 ± 0.10
F
:7.50 ± 0.10
G(min) :0.60
P2
:2.00 ± 0.1
P1
:12.00 ± 0.1
D1(min) :1.50
Ao
:7.60 ± 0.10
Ko
Bo
:9.60 ± 0.10
Ct
:13.3
Reel (all dimensions in mm)
A
: 330
W1
:16.4
W2(max) :22.4
N(min) : 50
C
:13.0
A
Pull Off Direction
Do
PIN Marker
P1
Po
P2
Date Code
Typ
D1
Ao
W2
C
N
12.03.2014
3/5
W1
The minimum bending radius is 45 mm.
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.