TFS155A Datasheet, PDF (3/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs 155a.doc
VI TELEFILTER
Version 1.3
Filter specification
TFS 155A
02.02.2005
3/5
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
2000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
W
: 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,1
E
: 1,75 ± 0,1
F
: 7,5 ± 0,1
G (min) : 0,6
CT
P2 : 2 ± 0,1
P1 : 12 ± 0,1
D1(min) : 1,5
Ao : 7,6 ± 0,1
Bo : 9,6 ± 0,1
CT : 13,5 + 0,1
COVER TAPE
EMBOSSED CARRIER TAPE
Do
Po
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A
:
W1
:
W2 (max) :
N (min) :
C
:
330
16,4 +2
22,4
60
12,8 ± 0,1
C
A
W2
N
W1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.