TFS150AR Datasheet, PDF (3/5 Pages) Vectron International, Inc – Filter specification

Filename: TFS150AR.doc
Vectron International
Version 2.2
Filter specification
TFS 150AR
08.10.2012
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
min. 300 mm
min. 500 mm
min. 300 mm
Tape (all dimensions in mm)
W
:32,00
t
Po
:4,00 ± 0,1
Do
:1,50 +0,1/-0
E
:1,75 ± 0,1
F
:14,20 ± 0,1
G(min) :
P2
:2,00 ± 0,1
Ko
P1
:16,00 ± 0,1
D1(min) :2,00
Ao
:10,25 ± 0,1
Bo
:20,45
Ct
:25,5
Reel (all dimensions in mm)
A
: 330
W1
:32,4
W2(max) :38,4
N(min) : 100
C
:13,0
A
Pull Off Direc tion
Do
Po
Date Co de
P1
P2
Ao
Typ e
C
PIN Marker
D1
W2
N
W1
The minimum bending radius is 45 mm.
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.