TFH36A Datasheet, PDF (3/5 Pages) Vectron International, Inc – Filter Specification

File name : TFH36A.doc
VI TELEFILTER
Filter Specification
Version 1.0
TFH 36A
13.03.2001
3/5
5. Stability characteristics :
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
6. Packing :
Tape & Reel:
DIN IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
1000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
W
:
Po
:
Do
:
E
:
F
:
G (min) :
P2
:
P1
:
D1(min) :
Ao
:
Bo
:
CT
:
44 ± 0,3
4 ± 0,1
1,5 + 0,1
1,75 ± 0,1
20,25 ± 0,05
0,75
2 ± 0,05
16 ± 0,1
2,0
9,3 ± 0,1
24,9 ± 0,1
38 ± 0,2
CT
COVER TAPE
D0
P0
EMBOSSED CARRIER TAPE
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A
:
W1
:
W2 (max) :
N (min) :
C
:
330
46
50
100
13 ± 0,2
C
A
W2
N
W1
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: [phone] Fax: [phone]
Email: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.