OX-175_14 Datasheet, PDF (3/6 Pages) Vectron International, Inc – Ultra Low Noise Oven Controlled Crystal Oscillator

Additional Parameters
Parameter
Min
Typical Max
Units
g-sensitivity
1
ppb/g
g-sensitivity of 0.5 ppb/g available in this package size. Please contact factory for ordering information.
For g-sensitivity <0.5 ppb/g please review the OX-046 series.
Weight
25
g
Condition
Supply Voltage (Vs)
Output Load
Operable Temperature Range
Shock (Endurance)
Sine Vibration (Endurance)
Random Vibration (Endurance)
Humidity
Seal
Altitude
Resistance to Soldering Heat
Terminal Strength
Moisture Sensitive Level
RoHS
Storage Temperature Range
Absolute Maximum Ratings
15.0
VDC
25
open
Ω
Operable temperature range implies the
device will continue to operate with no long-
-55
+95
°C
term damage to unit; however, it will not be
specification compliant outside the operating
temperature range
Environmental and Product Classification
MIL-STD-202, Method 213, Condition J, 30g 11 ms
MIL-STD-202, Method 201 and 204, Condition A, except 5g to 500 Hz, 1 sweep each axis
MIL-STD-202, Method 214, Condition I-D
MIL-STD-202, Method 103, Condition B, 100% rh
MIL-STD-202, Method 112, Condition D, hermetic, washable
MIL-STD-202, Method 105, sea level to space
MIL-STD-202, Method 210, Condition A,B,C
MIL-STD-202, Method 211, Condition C (5 bends at 45^o, 2 lbs)
1
6 (fully compliant)
-55
+125
°C
Page 3 of 6
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com